On Tuesday 20 January 2009, Afzal Nadirshah wrote:
I was going through the u-boot archives and I came across a reply from Leonid (http://lists.denx.de/pipermail/u-boot/2008-March/030788.html)
Accordingly I did the following :
- I set the TEXT_BASE to the address 0x1000000 in
board/amcc/canyonlands/config.mk 2. The initdram function in board/amcc/canyonlands/canyonlands.c was left alone as it contained only the following code : return CFG_MBYTES_SDRAM << 20; 3.i did not have the file board/xilinx/ml403/u-boot.lds, instead of that, I used the file board/xilinx/ppc440generic/u-boot-ram.lds.
With these changes I compiled the u-boot and it compiled properly.
Then I loaded the bin file using the BDI 3000 to the location 0x1000000, I set rm pc 0x1000100 And entered the command "go". After this I expected to get the u-boot messages through the serial port on minicom. But I din get anything on minicom.
Could you please guide me as to where I am going wrong?
Are you sure that your DDR2 setup in the BDI init script is correct? Did you do some basic memory testing via the BDI?
As explained before, this is not a supported config option for PPC4xx. So many things could go wrong here. You must make sure for example that no SDRAM init code is executed anymore. And perhaps other CPU init stuff has to be removed for such an image as well.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================