Re: [U-Boot] [PATCH v7 4/7] mips: ath79: add serial driver for ar933x SOC

Am Sonntag, den 17.01.2016, 02:13 +0800 schrieb Wills Wang:

Reviewed-by: Thomas Chou thomas@wytron.com.tw

Signed-off-by: Wills Wang wills.wang@live.com

Reviewed-by: Daniel Schwierzeck daniel.schwierzeck@gmail.com

nits below

---

Changes in v7:

• remove map_physmem for debug port

Changes in v6:

• Remove wait loop in putc and getc
• Use map_physmem instead of KSEG1ADDR

Changes in v5:

• remove ar933x_serial_platdata
• Import document "qca,ar9330-uart.txt" from kernel
• Add support for debug UART

Changes in v4:

• Auto calculate baudrate for serial driver
• Move pinctrl code in serial driver into arch/mips/mach-ath79
• Use get_serial_clock to serial clock source

Changes in v3:

• Convert serial driver to driver model

Changes in v2:

• Move serial driver code into drivers/serial

.../serial/qca,ar9330-uart.txt | 24 ++ drivers/serial/Kconfig | 17 ++ drivers/serial/Makefile | 1 + drivers/serial/serial_ar933x.c | 254 +++++++++++++++++++++ 4 files changed, 296 insertions(+) create mode 100644 doc/device-tree-bindings/serial/qca,ar9330 -uart.txt create mode 100644 drivers/serial/serial_ar933x.c

diff --git a/doc/device-tree-bindings/serial/qca,ar9330-uart.txt b/doc/device-tree-bindings/serial/qca,ar9330-uart.txt new file mode 100644 index 0000000..ec576a1 --- /dev/null +++ b/doc/device-tree-bindings/serial/qca,ar9330-uart.txt @@ -0,0 +1,24 @@ +* Qualcomm Atheros AR9330 High-Speed UART

+Required properties:

+- compatible: Must be "qca,ar9330-uart"

+- reg: Specifies the physical base address of the controller and

• the length of the memory mapped region.

+Additional requirements:

• Each UART port must have an alias correctly numbered in "aliases"
• node.

+Example:

• aliases {

• serial0 = &uart0;
  

• };
• uart0: uart@18020000 {

• compatible = "qca,ar9330-uart";
  

• reg = <0x18020000 0x14>;
  

• };

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 1fc287e..f147379 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -69,6 +69,14 @@ config DEBUG_UART_ALTERA_UART You will need to provide parameters to make this work. The driver will be available until the real driver model serial is running.

+config DEBUG_UART_AR933X

• bool "QCA/Atheros ar933x"

you should add

depends on AR933X_UART

• help

•  Select this to enable a debug UART using the ar933x uart
  

driver.

•  You will need to provide parameters to make this work. The
  

•  driver will be available until the real driver model
  

serial is

•  running.
  

config DEBUG_UART_NS16550 bool "ns16550" help @@ -186,6 +194,15 @@ config ALTERA_UART Select this to enable an UART for Altera devices. Please find details on the "Embedded Peripherals IP User Guide" of Altera.

+config AR933X_UART

• bool "QCA/Atheros ar933x UART support"
• depends on DM_SERIAL

should be

depends on DM_SERIAL && ARCH_ATH79

• help

•  Select this to enable UART support for QCA/Atheros ar933x
  

•  devices. This driver uses driver model and requires a
  

device

•  tree binding to operate, please refer to the document at
  

•  doc/device-tree-bindings/serial/qca,ar9330-uart.txt.
  

config SYS_NS16550 bool "NS16550 UART or compatible" help diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index dd87147..b7b82ae 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -17,6 +17,7 @@ endif

obj-$(CONFIG_ALTERA_UART) += altera_uart.o obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o +obj-$(CONFIG_AR933X_UART) += serial_ar933x.o obj-$(CONFIG_ARM_DCC) += arm_dcc.o obj-$(CONFIG_ATMEL_USART) += atmel_usart.o obj-$(CONFIG_EFI_APP) += serial_efi.o diff --git a/drivers/serial/serial_ar933x.c b/drivers/serial/serial_ar933x.c new file mode 100644 index 0000000..ccba2f5 --- /dev/null +++ b/drivers/serial/serial_ar933x.c @@ -0,0 +1,254 @@ +/*

• • Copyright (C) 2015-2016 Wills Wang wills.wang@live.com
• • SPDX-License-Identifier: GPL-2.0+
• */

+#include <common.h> +#include <dm.h> +#include <div64.h> +#include <errno.h> +#include <serial.h> +#include <asm/io.h> +#include <asm/addrspace.h> +#include <asm/types.h> +#include <mach/ar71xx_regs.h>

+#define AR933X_UART_DATA_REG 0x00 +#define AR933X_UART_CS_REG 0x04 +#define AR933X_UART_CLK_REG 0x08

+#define AR933X_UART_DATA_TX_RX_MASK 0xff +#define AR933X_UART_DATA_RX_CSR BIT(8) +#define AR933X_UART_DATA_TX_CSR BIT(9) +#define AR933X_UART_CS_IF_MODE_S 2 +#define AR933X_UART_CS_IF_MODE_M 0x3 +#define AR933X_UART_CS_IF_MODE_DTE 1 +#define AR933X_UART_CS_IF_MODE_DCE 2 +#define AR933X_UART_CS_TX_RDY_ORIDE BIT(7) +#define AR933X_UART_CS_RX_RDY_ORIDE BIT(8) +#define AR933X_UART_CLK_STEP_M 0xffff +#define AR933X_UART_CLK_SCALE_M 0xfff +#define AR933X_UART_CLK_SCALE_S 16 +#define AR933X_UART_CLK_STEP_S 0

+struct ar933x_serial_priv {

• void __iomem *regs;

+};

+static inline u32 ar933x_serial_read(struct udevice *dev, u32 offset) +{

• struct ar933x_serial_priv *priv = dev_get_priv(dev);
• return readl(priv->regs + offset);

+}

+static inline void ar933x_serial_write(struct udevice *dev,

• 		       u32 val, u32 offset)
  

+{

• struct ar933x_serial_priv *priv = dev_get_priv(dev);
• writel(val, priv->regs + offset);

+}

+/*

• • baudrate = (clk / (scale + 1)) * (step * (1 / 2^17))
• */

+static u32 ar933x_serial_get_baud(u32 clk, u32 scale, u32 step) +{

• u64 t;
• u32 div;
• div = (2 << 16) * (scale + 1);
• t = clk;
• t *= step;
• t += (div / 2);
• do_div(t, div);
• return t;

+}

+static void ar933x_serial_get_scale_step(u32 clk, u32 baud,

• 			 u32 *scale, u32 *step)
  

+{

• u32 tscale, baudrate;
• long min_diff;
• *scale = 0;
• *step = 0;
• min_diff = baud;
• for (tscale = 0; tscale < AR933X_UART_CLK_SCALE_M; tscale++)

{

• u64 tstep;
  

• int diff;
  

• tstep = baud * (tscale + 1);
  

• tstep *= (2 << 16);
  

• do_div(tstep, clk);
  

• if (tstep > AR933X_UART_CLK_STEP_M)
  

• 	break;
  

• baudrate = ar933x_serial_get_baud(clk, tscale,
  

tstep);

• diff = abs(baudrate - baud);
  

• if (diff < min_diff) {
  

• 	min_diff = diff;
  

• 	*scale = tscale;
  

• 	*step = tstep;
  

• }
  

• }

+}

+static int ar933x_serial_setbrg(struct udevice *dev, int baudrate) +{

• u32 val, scale, step;
• val = get_serial_clock();
• ar933x_serial_get_scale_step(val, baudrate, &scale, &step);
• val = (scale & AR933X_UART_CLK_SCALE_M)

• 	<< AR933X_UART_CLK_SCALE_S;
  

• val |= (step & AR933X_UART_CLK_STEP_M)

• 	<< AR933X_UART_CLK_STEP_S;
  

• ar933x_serial_write(dev, val, AR933X_UART_CLK_REG);
• return 0;

+}

+static int ar933x_serial_putc(struct udevice *dev, const char c) +{

• u32 data;
• data = ar933x_serial_read(dev, AR933X_UART_DATA_REG);
• if (!(data & AR933X_UART_DATA_TX_CSR))

• return -EAGAIN;
  

• data = (u32)c | AR933X_UART_DATA_TX_CSR;
• ar933x_serial_write(dev, data, AR933X_UART_DATA_REG);
• return 0;

+}

+static int ar933x_serial_getc(struct udevice *dev) +{

• u32 data;
• data = ar933x_serial_read(dev, AR933X_UART_DATA_REG);
• if (!(data & AR933X_UART_DATA_RX_CSR))

• return -EAGAIN;
  

• ar933x_serial_write(dev, AR933X_UART_DATA_RX_CSR,

• 	    AR933X_UART_DATA_REG);
  

• return data & AR933X_UART_DATA_TX_RX_MASK;

+}

+static int ar933x_serial_pending(struct udevice *dev, bool input) +{

• u32 data;
• data = ar933x_serial_read(dev, AR933X_UART_DATA_REG);
• if (input)

• return (data & AR933X_UART_DATA_RX_CSR) ? 1 : 0;
  

• else

• return (data & AR933X_UART_DATA_TX_CSR) ? 0 : 1;
  

+}

+static int ar933x_serial_probe(struct udevice *dev) +{

• struct ar933x_serial_priv *priv = dev_get_priv(dev);
• u32 val;
• fdt_addr_t addr;
• addr = dev_get_addr(dev);
• if (addr == FDT_ADDR_T_NONE)

• return -EINVAL;
  

• priv->regs = map_physmem(addr,

• 		 AR933X_UART_SIZE,
  

• 		 MAP_NOCACHE);
  

• /*

• * UART controller configuration:
  

• * - no DMA
  

• * - no interrupt
  

• * - DCE mode
  

• * - no flow control
  

• * - set RX ready oride
  

• * - set TX ready oride
  

• */
  

• val = (AR933X_UART_CS_IF_MODE_DCE <<

AR933X_UART_CS_IF_MODE_S) |

•      AR933X_UART_CS_TX_RDY_ORIDE |
  

AR933X_UART_CS_RX_RDY_ORIDE;

• ar933x_serial_write(dev, val, AR933X_UART_CS_REG);
• return 0;

+}

+static const struct dm_serial_ops ar933x_serial_ops = {

• .putc = ar933x_serial_putc,
• .pending = ar933x_serial_pending,
• .getc = ar933x_serial_getc,
• .setbrg = ar933x_serial_setbrg,

+};

+static const struct udevice_id ar933x_serial_ids[] = {

• { .compatible = "qca,ar9330-uart" },
• { }

+};

+U_BOOT_DRIVER(serial_ar933x) = {

• .name = "serial_ar933x",
• .id = UCLASS_SERIAL,
• .of_match = ar933x_serial_ids,
• .priv_auto_alloc_size = sizeof(struct ar933x_serial_priv),
• .probe = ar933x_serial_probe,
• .ops = &ar933x_serial_ops,
• .flags = DM_FLAG_PRE_RELOC,

+};

+#ifdef CONFIG_DEBUG_UART_AR933X

+#include <debug_uart.h>

+static inline void _debug_uart_init(void) +{

• void __iomem *regs = (void *)CONFIG_DEBUG_UART_BASE;
• u32 val, scale, step;
• /*

• * UART controller configuration:
  

• * - no DMA
  

• * - no interrupt
  

• * - DCE mode
  

• * - no flow control
  

• * - set RX ready oride
  

• * - set TX ready oride
  

• */
  

• val = (AR933X_UART_CS_IF_MODE_DCE <<

AR933X_UART_CS_IF_MODE_S) |

•      AR933X_UART_CS_TX_RDY_ORIDE |
  

AR933X_UART_CS_RX_RDY_ORIDE;

• writel(val, regs + AR933X_UART_CS_REG);
• ar933x_serial_get_scale_step(CONFIG_DEBUG_UART_CLOCK,

• 		     CONFIG_BAUDRATE, &scale,
  

&step);

• val = (scale & AR933X_UART_CLK_SCALE_M)

• 	<< AR933X_UART_CLK_SCALE_S;
  

• val |= (step & AR933X_UART_CLK_STEP_M)

• 	<< AR933X_UART_CLK_STEP_S;
  

• writel(val, regs + AR933X_UART_CLK_REG);

+}

+static inline void _debug_uart_putc(int c) +{

• void __iomem *regs = (void *)CONFIG_DEBUG_UART_BASE;
• u32 data;
• do {

• data = readl(regs + AR933X_UART_DATA_REG);
  

• } while (!(data & AR933X_UART_DATA_TX_CSR));
• data = (u32)c | AR933X_UART_DATA_TX_CSR;
• writel(data, regs + AR933X_UART_DATA_REG);

+}

+DEBUG_UART_FUNCS

+#endif