From: Vipin KUMAR vipin.kumar@st.com
Ethernet probing is removed from u-boot compiled as a firmware for spear flashing utility. This enables faster access to usbtty interface as unused ethernet i/f is not initialized.
Signed-off-by: Vipin Kumar vipin.kumar@st.com Signed-off-by: Amit Virdi amit.virdi@st.com --- include/configs/spear-common.h | 10 ++++++++++ include/configs/spear3xx_evb.h | 3 ++- include/configs/spear6xx_evb.h | 1 - 3 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index f4980b0..14e3ec4 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -27,6 +27,7 @@ * Common configurations used for both spear3xx as well as spear6xx */
+#if !defined(CONFIG_SPEAR_USBTTY) /* Ethernet driver configuration */ #define CONFIG_MII #define CONFIG_DESIGNWARE_ETH @@ -34,6 +35,7 @@ #define CONFIG_DW0_PHY 1 #define CONFIG_NET_MULTI #define CONFIG_PHY_RESET_DELAY (10000) /* in usec */ +#endif
/* USBD driver configuration */ #define CONFIG_DW_UDC @@ -109,14 +111,22 @@ #define CONFIG_CMD_MEMORY #define CONFIG_CMD_RUN #define CONFIG_CMD_SAVES + +#if !defined(CONFIG_SPEAR_USBTTY) #define CONFIG_CMD_NET #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP +#endif
/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <config_cmd_default.h>
+#if defined(CONFIG_SPEAR_USBTTY) +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#endif + /* * Default Environment Varible definitions */ diff --git a/include/configs/spear3xx_evb.h b/include/configs/spear3xx_evb.h index 263c058..84fad0c 100644 --- a/include/configs/spear3xx_evb.h +++ b/include/configs/spear3xx_evb.h @@ -51,6 +51,7 @@
#include <configs/spear-common.h>
+#if !defined(CONFIG_SPEAR_USBTTY) /* Ethernet driver configuration */ #define CONFIG_DW_ALTDESCRIPTOR 1
@@ -66,6 +67,7 @@ #define CONFIG_MACB0_PHY 0x01
#endif +#endif
/* Serial Configuration (PL011) */ #define CONFIG_SYS_SERIAL0 0xD0000000 @@ -144,7 +146,6 @@ #endif
/* NAND flash configuration */ -#define CONFIG_SYS_FSMC_NAND_SP #define CONFIG_SYS_FSMC_NAND_8BIT
#if defined(CONFIG_SPEAR300) diff --git a/include/configs/spear6xx_evb.h b/include/configs/spear6xx_evb.h index a61d9be..d901ba8 100644 --- a/include/configs/spear6xx_evb.h +++ b/include/configs/spear6xx_evb.h @@ -49,7 +49,6 @@ (void *)CONFIG_SYS_SERIAL1 }
/* NAND flash configuration */ -#define CONFIG_SYS_FSMC_NAND_SP #define CONFIG_SYS_FSMC_NAND_8BIT #define CONFIG_SYS_NAND_BASE (0xD2000000)