Enable the TI DP83867 Giga bit phy on the dra7 rev c board. The rx and tx internal delays are need for this board so the usage of RGMII_ID is required.
Signed-off-by: Dan Murphy dmurphy@ti.com --- board/ti/dra7xx/evm.c | 6 ++++++ include/configs/dra7xx_evm.h | 1 + 2 files changed, 7 insertions(+)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 25f2031..9bd71d8 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -27,6 +27,7 @@ #include <dwc3-uboot.h> #include <dwc3-omap-uboot.h> #include <ti-usb-phy-uboot.h> +#include <miiphy.h>
#include "mux_data.h" #include "../common/board_detect.h" @@ -679,6 +680,11 @@ int board_eth_init(bd_t *bis) if (*omap_si_rev == DRA722_ES1_0) cpsw_data.active_slave = 1;
+ if (board_is_dra72x_revc_or_later()) { + cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII_ID; + cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RGMII_ID; + } + ret = cpsw_register(&cpsw_data); if (ret < 0) printf("Error %d registering CPSW switch\n", ret); diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index c0795ab..7734e8d 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -155,6 +155,7 @@ #define CONFIG_MII /* Required in net/eth.c */ #define CONFIG_PHY_GIGE /* per-board part of CPSW */ #define CONFIG_PHYLIB +#define CONFIG_PHY_TI
/* SPI */ #undef CONFIG_OMAP3_SPI