Dear Niklaus,
In message 200907300832.15979.niklaus.giger@member.fsf.org you wrote:
I would like to do some more extensive tests with the U-boot and took a look at http://www.denx.de/wiki/DUTS/DUTSDocs
I think that the wiki is somehow out of date as examples as the following a) ./duts b should be rewritten to /duts -showconfig ? Is this true?
I think this is easily possible. Detlev and Vitaly have been working heavily on DUTS in the past months, and I can imagine they did not always update the documentation.
Detlev, maybe you can comment here?
b) ./duts -showconfig v38b gives on my system the following output:
Again, this is better for Detlev to comment...
I would volunteer to update the wiki if somebody can confirm that my observations are correct.
Cool - thank in advance. Detlev, say yes, and quickly :-)
ERROR: couldn't spawn 'connect'?!
I would appreciate any hints. As the section "I"ntroducing suppport for a new VL " is just a little be too small for me. E.g. how can I add a new VL. Is there an example I just can copy and adjust it? Where do I specify the tty device for the sequoia?
"connect" is a small shell script we use internally:
=============================================================================== #!/bin/bash
if [ $# != 1 ] ; then echo "Usage: $0 target" >&2 exit 1 fi
### Server Target LIST=" ts2 acadia 7029 ts0 ads5121 ts0 ads8272 ts0 arches ts0 aria ts1 bamboo ts0 beagle ts9 bifas ts1 bubinga ts2 canyonlands 7009 [... list truncated ...] ts1 walnut ts2 yellowstone 7019 ts2 yosemite 7022 ts0 yucca ts0 yucca_a ts2 mgcoge11 7026 "
CMD='' TRG=''
case "$1" in
-l|-h|--help|-?) echo 'Known targets:' while read srv trg prt do [ "$trg" ] && echo $trg done <<_E_O_F_ | \ pr -o 4 -t -5 -w76 $LIST _E_O_F_ exit 0 ;;
*) while read srv trg port do tmp1=`echo $trg | tr '[:upper:]' '[:lower:]'` tmp2=`echo $1 | tr '[:upper:]' '[:lower:]'` if [ "$tmp1" = "$tmp2" ] then TRG=$trg if [ -z "$port" ] then CMD="/usr/bin/rlogin $srv -l $trg" else CMD="/usr/bin/telnet $srv $port" fi fi done <<_E_O_F_ $LIST _E_O_F_ ;; esac
if [ -z "$CMD" ] then echo "Unknown target: $1" >&2 exit 1 fi echo "### Connect to "$TRG" using command: $CMD" exec $CMD =========================================================================
We are using two types of terminal servers here: one type (for example Lantronix ETS types, or Linux boxen with multiport serial cards running our "tserver" package, see ftp://ftp.denx.de/pub/tools/tserver-0.17-4.src.rpm) can be connected using a "rlogin server_name port_name" command, while the other type (for example Cyclades TS2000 / TS3000) require a "telnet server_name port_number" command).
In your setup you could use our connect script, and install the "tserver" package on your host system; then use an entry like
# port device parameters # sequoia /dev/ttyUSB3 115200,8,N,1
in your /etc/tserver.conf file - then you can use a "rlogin server_name sequoia" command to attach to this port which works nicely with the above tools.
Best regards,
Wolfgang Denk