Since the board uses SPL_OF_CONTROL now, we don't need to explicitly initialize the MMC driver, but we still need to pinmux the corresponding pins. This patch removes the initialization code and leave just the muxing behind. Signed-off-by: Adam Ford aford173@gmail.com diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c index b17a3b1d39..ab1c7f266e 100644 --- a/board/logicpd/imx6/imx6logic.c +++ b/board/logicpd/imx6/imx6logic.c @@ -222,25 +222,15 @@ int board_mmc_init(bd_t *bis) switch (reg) { case 0: SETUP_IOMUX_PADS(usdhc1_pads);
usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR;usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;break; case 1: SETUP_IOMUX_PADS(usdhc2_pads);
usdhc_cfg[1].esdhc_base = USDHC2_BASE_ADDR;usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);gd->arch.sdhc_clk = usdhc_cfg[1].sdhc_clk;break; }
return fsl_esdhc_initialize(bis, &usdhc_cfg[reg]);
- return 0;
}
-int board_mmc_getcd(struct mmc *mmc) -{
- return 1;
-} #endif
static void ccgr_init(void)
Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic