Enable USB host support on MX8MM Verdin.
Signed-off-by: Marek Vasut marex@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Max Krummenacher max.krummenacher@toradex.com Cc: Oleksandr Suvorov oleksandr.suvorov@toradex.com --- V2: No change --- configs/verdin-imx8mm_defconfig | 8 +++++++- include/configs/verdin-imx8mm.h | 5 +++++ 2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig index ea0b5978f1..c8c3420b6a 100644 --- a/configs/verdin-imx8mm_defconfig +++ b/configs/verdin-imx8mm_defconfig @@ -37,7 +37,6 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y -CONFIG_SPL_USB_HOST_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_PROMPT="Verdin iMX8MM # " # CONFIG_BOOTM_NETBSD is not set @@ -50,6 +49,7 @@ CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y CONFIG_CMD_CACHE=y CONFIG_CMD_UUID=y CONFIG_CMD_REGULATOR=y @@ -89,6 +89,8 @@ CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX8M_POWER_DOMAIN=y CONFIG_DM_PMIC=y CONFIG_SPL_DM_PMIC_PCA9450=y CONFIG_DM_PMIC_PFUZE100=y @@ -101,5 +103,9 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y +CONFIG_USB=y +CONFIG_DM_USB=y +# CONFIG_SPL_DM_USB is not set +CONFIG_USB_EHCI_HCD=y CONFIG_IMX_WATCHDOG=y CONFIG_OF_LIBFDT_OVERLAY=y diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index 4751bf5a5a..e2a817891c 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -117,5 +117,10 @@ #define FEC_QUIRK_ENET_MAC #define IMX_FEC_BASE 0x30BE0000
+/* USB Configs */ +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + #endif /*_VERDIN_IMX8MM_H */