Defined bank addr code on CONFIG_SPI_FLASH_BAR macro, to reduce the size for existing boards which has < 16Mbytes SPI flashes.
It's upto user which has provision to use the bank addr code for flashes which has > 16Mbytes.
Signed-off-by: Jagannadha Sutradharudu Teki jaganna@xilinx.com --- Changes for v4: - init bank_curr to 0 for < 16Mbytes if CONFIG_SPI_FLASH_BAR defined Changes for v4: - none Changes for v4: - none
README | 5 ++++ drivers/mtd/spi/spi_flash.c | 45 +++++++++++++++++++++++------------- drivers/mtd/spi/spi_flash_internal.h | 14 ++++++----- include/spi_flash.h | 3 ++- 4 files changed, 44 insertions(+), 23 deletions(-)
diff --git a/README b/README index 3d81092..a2b956e 100644 --- a/README +++ b/README @@ -2489,6 +2489,11 @@ CBFS (Coreboot Filesystem) support Define this option to include a destructive SPI flash test ('sf test').
+ CONFIG_SPI_FLASH_BAR Ban/Extended Addr Reg + + Define this option to use the Bank addr/Extended addr + support on SPI flashes which has size > 16Mbytes. + - SystemACE Support: CONFIG_SYSTEMACE
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 40c0389..2307f2b 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -74,7 +74,7 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset, unsigned long page_addr, byte_addr, page_size; size_t chunk_len, actual; int ret; - u8 cmd[4], bank_sel; + u8 cmd[4];
page_size = flash->page_size;
@@ -86,6 +86,9 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset,
cmd[0] = CMD_PAGE_PROGRAM; for (actual = 0; actual < len; actual += chunk_len) { +#ifdef CONFIG_SPI_FLASH_BAR + u8 bank_sel; + bank_sel = offset / SPI_FLASH_16MB_BOUN;
ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); @@ -93,7 +96,7 @@ int spi_flash_cmd_write_multi(struct spi_flash *flash, u32 offset, debug("SF: fail to set bank%d\n", bank_sel); return ret; } - +#endif page_addr = offset / page_size; byte_addr = offset % page_size; chunk_len = min(len - actual, page_size - byte_addr); @@ -162,6 +165,7 @@ int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset, cmd[4] = 0x00;
while (len) { +#ifdef CONFIG_SPI_FLASH_BAR bank_sel = offset / SPI_FLASH_16MB_BOUN;
ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); @@ -169,7 +173,7 @@ int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset, debug("SF: fail to set bank%d\n", bank_sel); return ret; } - +#endif remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1) - offset); if (len < remain_len) read_len = len; @@ -240,7 +244,7 @@ int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len) { u32 erase_size; int ret; - u8 cmd[4], bank_sel; + u8 cmd[4];
erase_size = flash->sector_size; if (offset % erase_size || len % erase_size) { @@ -260,6 +264,9 @@ int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len) cmd[0] = CMD_ERASE_64K;
while (len) { +#ifdef CONFIG_SPI_FLASH_BAR + u8 bank_sel; + bank_sel = offset / SPI_FLASH_16MB_BOUN;
ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); @@ -267,7 +274,7 @@ int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len) debug("SF: fail to set bank%d\n", bank_sel); return ret; } - +#endif spi_flash_addr(offset, cmd);
debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1], @@ -321,6 +328,7 @@ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr) return 0; }
+#ifdef CONFIG_SPI_FLASH_BAR int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel) { u8 cmd, idcode0; @@ -379,6 +387,7 @@ int spi_flash_cmd_bankaddr_read(struct spi_flash *flash, void *data)
return spi_flash_read_common(flash, &cmd, 1, data, 1); } +#endif
#ifdef CONFIG_OF_CONTROL int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) @@ -481,7 +490,6 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, struct spi_flash *flash = NULL; int ret, i, shift; u8 idcode[IDCODE_LEN], *idp; - u8 curr_bank = 0;
spi = spi_setup_slave(bus, cs, max_hz, spi_mode); if (!spi) { @@ -525,9 +533,24 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, goto err_manufacturer_probe; }
+#ifdef CONFIG_SPI_FLASH_BAR + u8 curr_bank = 0; + /* store the manuf id, for performing specific flash ops */ flash->idcode0 = *idp;
+ /* read bankaddr, which bank the flash is operated currently */ + if (flash->size > SPI_FLASH_16MB_BOUN) { + if (spi_flash_cmd_bankaddr_read(flash, &curr_bank)) { + debug("SF: fail to read bank addr register\n"); + goto err_manufacturer_probe; + } + flash->bank_curr = curr_bank; + } else { + flash->bank_curr = curr_bank; + } +#endif + #ifdef CONFIG_OF_CONTROL if (spi_flash_decode_fdt(gd->fdt_blob, flash)) { debug("SF: FDT decode error\n"); @@ -541,16 +564,6 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, printf(", mapped at %p", flash->memory_map); puts("\n");
- if (flash->size > SPI_FLASH_16MB_BOUN) { - if (spi_flash_cmd_bankaddr_read(flash, &curr_bank)) { - debug("SF: fail to read bank addr register\n"); - goto err_manufacturer_probe; - } - flash->bank_curr = curr_bank; - } else { - flash->bank_curr = curr_bank; - } - spi_release_bus(spi);
return flash; diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h index 455dc02..12d49a8 100644 --- a/drivers/mtd/spi/spi_flash_internal.h +++ b/drivers/mtd/spi/spi_flash_internal.h @@ -12,8 +12,6 @@ #define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) #define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
-#define SPI_FLASH_16MB_BOUN 0x1000000 - /* Common commands */ #define CMD_READ_ID 0x9f
@@ -30,11 +28,15 @@ #define CMD_ERASE_64K 0xd8 #define CMD_ERASE_CHIP 0xc7
+#define SPI_FLASH_16MB_BOUN 0x1000000 + /* Bank addr acess commands */ -#define CMD_BANKADDR_BRWR 0x17 -#define CMD_BANKADDR_BRRD 0x16 -#define CMD_EXTNADDR_WREAR 0xC5 -#define CMD_EXTNADDR_RDEAR 0xC8 +#ifdef CONFIG_SPI_FLASH_BAR +# define CMD_BANKADDR_BRWR 0x17 +# define CMD_BANKADDR_BRRD 0x16 +# define CMD_EXTNADDR_WREAR 0xC5 +# define CMD_EXTNADDR_RDEAR 0xC8 +#endif
/* Common status */ #define STATUS_WIP 0x01 diff --git a/include/spi_flash.h b/include/spi_flash.h index acac17a..5de50c2 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -38,11 +38,12 @@ struct spi_flash { u32 page_size; /* Erase (sector) size */ u32 sector_size; +#ifdef CONFIG_SPI_FLASH_BAR /* ID code0 */ u8 idcode0; /* Current flash bank */ u8 bank_curr; - +#endif void *memory_map; /* Address of read-only SPI flash access */ int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf);