From: Valentin Longchamp valentin.longchamp@keymile.com
This used to be done with registers direct access, which is not clear and optimal.
Signed-off-by: Valentin Longchamp valentin.longchamp@keymile.com Signed-off-by: Holger Brunck holger.brunck@keymile.com cc: Gerlando Falauto gerlando.falauto@keymile.com cc: Prafulla Wadaskar prafulla@marvell.com --- board/keymile/km_arm/km_arm.c | 55 +++++++++++++++++++++-------------------- include/configs/km/km_arm.h | 2 +- 2 files changed, 29 insertions(+), 28 deletions(-)
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index c6c9a71..2507734 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -242,20 +242,15 @@ int misc_init_r(void)
int board_early_init_f(void) { - u32 tmp; - kirkwood_mpp_conf(kwmpp_config);
/* - * The FLASH_GPIO_PIN switches between using a + * The KM_FLASH_GPIO_PIN switches between using a * NAND or a SPI FLASH. Set this pin on start * to NAND mode. */ - tmp = readl(KW_GPIO0_BASE); - writel(tmp | FLASH_GPIO_PIN , KW_GPIO0_BASE); - tmp = readl(KW_GPIO0_BASE + 4); - writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE + 4); - + kw_gpio_set_valid(KM_FLASH_GPIO_PIN, 1); + kw_gpio_direction_output(KM_FLASH_GPIO_PIN, 1); #if defined(CONFIG_SOFT_I2C) /* init the GPIO for I2C Bitbang driver */ kw_gpio_set_valid(KM_KIRKWOOD_SDA_PIN, 1); @@ -284,35 +279,41 @@ int board_init(void) return 0; }
+int km_hw_spi_bus_claim(int on) +{ + int gpio_value = !on; + + if (on) { + kwmpp_config[0] = MPP0_SPI_SCn; + kwmpp_config[1] = MPP1_SPI_MOSI; + kwmpp_config[2] = MPP2_SPI_SCK; + kwmpp_config[3] = MPP3_SPI_MISO; + } else { + kwmpp_config[0] = MPP0_NF_IO2; + kwmpp_config[1] = MPP1_NF_IO3; + kwmpp_config[2] = MPP2_NF_IO4; + kwmpp_config[3] = MPP3_NF_IO5; + } + + /* Multi-Purpose Pins Functionality configuration */ + kirkwood_mpp_conf(kwmpp_config); + kw_gpio_set_value(KM_FLASH_GPIO_PIN, gpio_value); + + return 0; +} + #if defined(CONFIG_CMD_SF) int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - u32 tmp; if (argc < 2) return cmd_usage(cmdtp);
if ((strcmp(argv[1], "off") == 0)) { printf("SPI FLASH disabled, NAND enabled\n"); - /* Multi-Purpose Pins Functionality configuration */ - kwmpp_config[0] = MPP0_NF_IO2; - kwmpp_config[1] = MPP1_NF_IO3; - kwmpp_config[2] = MPP2_NF_IO4; - kwmpp_config[3] = MPP3_NF_IO5; - - kirkwood_mpp_conf(kwmpp_config); - tmp = readl(KW_GPIO0_BASE); - writel(tmp | FLASH_GPIO_PIN , KW_GPIO0_BASE); + km_hw_spi_bus_claim(0); } else if ((strcmp(argv[1], "on") == 0)) { printf("SPI FLASH enabled, NAND disabled\n"); - /* Multi-Purpose Pins Functionality configuration */ - kwmpp_config[0] = MPP0_SPI_SCn; - kwmpp_config[1] = MPP1_SPI_MOSI; - kwmpp_config[2] = MPP2_SPI_SCK; - kwmpp_config[3] = MPP3_SPI_MISO; - - kirkwood_mpp_conf(kwmpp_config); - tmp = readl(KW_GPIO0_BASE); - writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE); + km_hw_spi_bus_claim(1); } else { return cmd_usage(cmdtp); } diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index 36eb765..e2e8793 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -227,7 +227,7 @@ int get_scl(void); #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO
-#define FLASH_GPIO_PIN 0x00010000 +#define KM_FLASH_GPIO_PIN 16
#define MTDIDS_DEFAULT "nand0=orion_nand" /* test-only: partitioning needs some tuning, this is just for tests */