Hi all,
I'm porting u-boot-1.1.3 to my S3C44B0X based evaluation board, so I referenced B2 board configuration(because it also based on S3C44B0X) and lart board configuration(because it also consists of an Intel flash memory). Last night, I got the u-boot.bin successfully and downloaded it into the Intel 28F320C3B flash. I could see the command line after reset the board. Then I tried to erase the last 64KB sector of the flash like this:
jx44b0>protect off 003F0000 003FFFFF
Un-protected 1 sectors
jx44b0>erase 003F0000 003FFFFF
Erasing...Device protect error
1 sector erased
I checked the last 8KB with "md 003FE000" and I found former data remained other than FFFFs. Erasing just didn't work correctly. I wonder what's the problem and shall I revise the flash.c in my board's folder.
Any hint would be appriecated.
Best regard,
Zhen Wang