Short circuit the retry loop in legacy_hub_port_reset() by returning an error from usb_control_msg() when a device was handed over to a companion by the ehci code. This avoids trying to reset low / fullspeed devices 5 times needlessly. Also do not print an error when a device has been handed over.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- common/usb_hub.c | 3 ++- drivers/usb/host/ehci-hcd.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/common/usb_hub.c b/common/usb_hub.c index 7aac220..af39c76 100644 --- a/common/usb_hub.c +++ b/common/usb_hub.c @@ -271,7 +271,8 @@ int usb_hub_port_connect_change(struct usb_device *dev, int port) /* Reset the port */ ret = legacy_hub_port_reset(dev, port, &portstatus); if (ret < 0) { - printf("cannot reset port %i!?\n", port + 1); + if (ret != -ENXIO) + printf("cannot reset port %i!?\n", port + 1); return ret; }
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index ce760d0..e4c462f 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -875,7 +875,7 @@ static int ehci_submit_root(struct usb_device *dev, unsigned long pipe, port - 1); reg |= EHCI_PS_PO; ehci_writel(status_reg, reg); - break; + return -ENXIO; } else { int ret;
@@ -905,6 +905,7 @@ static int ehci_submit_root(struct usb_device *dev, unsigned long pipe, reg &= ~EHCI_PS_CLEAR; reg |= EHCI_PS_PO; ehci_writel(status_reg, reg); + return -ENXIO; } else { ctrl->portreset |= 1 << port; }