Re: [U-Boot-Users] Executing an application from a specific address

On Thursday 01 September 2005 12:44, Swapnil Ashok Narkhede wrote:

I have a pxa250 (ARM)processor on Accelent board. As per Readme.Standalone i should be loading the application at 0x0c100000 and executing from the same address.But no where in the hello_world.c i find any link which tells the application that it should stick to the above specified address.

Look into the Makefile in the directory examples....

- Load the hello_world.bin into RAM (the address, you used in the Makefile), - add 4Bytes to the address where you loaded it and - use this address to start the programm with the command "go"