Enable USB on all Amlogic Meson GXL based board. Enable Regulator support on all boards. Enable ADC support on the LibreTech-CC board.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- configs/khadas-vim_defconfig | 14 ++++++++++++++ configs/libretech-cc_defconfig | 17 +++++++++++++++++ configs/odroid-c2_defconfig | 4 ++++ configs/p212_defconfig | 14 ++++++++++++++ 4 files changed, 49 insertions(+)
diff --git a/configs/khadas-vim_defconfig b/configs/khadas-vim_defconfig index 49a653f..1eb13df 100644 --- a/configs/khadas-vim_defconfig +++ b/configs/khadas-vim_defconfig @@ -16,10 +16,15 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM_GPIO=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y CONFIG_DM_MMC=y CONFIG_MMC_MESON_GX=y CONFIG_PHY_ADDR_ENABLE=y @@ -34,3 +39,12 @@ CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_DEBUG_UART_SKIP_INIT=y CONFIG_MESON_SERIAL=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y +CONFIG_USB_DWC3=y +CONFIG_USB_STORAGE=y +CONFIG_PHY=y +CONFIG_MESON_GXL_USB_PHY=y diff --git a/configs/libretech-cc_defconfig b/configs/libretech-cc_defconfig index 7ba2fa1..d4f2f58 100644 --- a/configs/libretech-cc_defconfig +++ b/configs/libretech-cc_defconfig @@ -13,13 +13,21 @@ CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_CMD_BDI is not set # CONFIG_CMD_IMI is not set +CONFIG_CMD_ADC=y CONFIG_CMD_GPIO=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_ADC=y +CONFIG_SARADC_MESON=y CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM_GPIO=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y CONFIG_DM_MMC=y CONFIG_MMC_MESON_GX=y CONFIG_PHY_ADDR_ENABLE=y @@ -34,3 +42,12 @@ CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_DEBUG_UART_SKIP_INIT=y CONFIG_MESON_SERIAL=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y +CONFIG_USB_DWC3=y +CONFIG_USB_STORAGE=y +CONFIG_PHY=y +CONFIG_MESON_GXL_USB_PHY=y diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig index ecc8d03..9be69ad 100644 --- a/configs/odroid-c2_defconfig +++ b/configs/odroid-c2_defconfig @@ -18,11 +18,15 @@ CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MESON=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y CONFIG_DM_MMC=y CONFIG_MMC_MESON_GX=y CONFIG_DM_ETH=y diff --git a/configs/p212_defconfig b/configs/p212_defconfig index 344c04a..f9b282e 100644 --- a/configs/p212_defconfig +++ b/configs/p212_defconfig @@ -16,10 +16,15 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_CMD_GPIO=y # CONFIG_CMD_LOADS is not set CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM_GPIO=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y CONFIG_DM_MMC=y CONFIG_MMC_MESON_GX=y CONFIG_PHY_ADDR_ENABLE=y @@ -34,3 +39,12 @@ CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_DEBUG_UART_SKIP_INIT=y CONFIG_MESON_SERIAL=y CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y +CONFIG_USB_DWC3=y +CONFIG_USB_STORAGE=y +CONFIG_PHY=y +CONFIG_MESON_GXL_USB_PHY=y