Dear Ramji PanchaReddy,
in message 96ce52d50809030639w747d050fhe918a0f3edd2c1c0@mail.gmail.com you wrote:
I am using BMW board. i used Sandpoint8245_config for board configuration based on the CPU when i load the u-boot.bin i got following o/p
...
FLASH: *** failed *** ### ERROR ### Please RESET the board ###
Well, what did you expect when you configure for board "A" and run on board "B"?
1.Did i configured u-boot correctly for my board.If so what else i have to do to boot the board smoothly.
If you really have a "BMW" Board then you must configure U-Boot for the "BMW" board. Any other board configuration cannot work.
2.which cross compiler i have to use to compile this and where can we get it?
You can for example use the ELDK. See http://www.denx.de/wiki/view/DULG/ELDKAvailability
Best regards,
Wolfgang Denk