19 Feb
2014
19 Feb
'14
2:57 p.m.
On Wed, 19 Feb 2014 08:42:57 -0500 Tom Rini trini@ti.com wrote:
On Mon, Feb 17, 2014 at 11:56:36AM -0600, Dennis Gilmore wrote:
Signed-off-by: Dennis Gilmore dennis@ausil.us
[snip]
"if ${usb_need_init}; then " \"set usb_need_init false; " \"usb start 0; " \Checking common/cmd_usb.c, 'start' doesn't take arguments.
Copied from tegra-common-post.h as is, will fix it up
+#ifdef CONFIG_CMD_SATA +#define BOOTCMDS_SATA \
- "sata_boot=" \
"setenv devtype sata; " \"if sata dev ${devnum}; then " \"run scan_boot; " \"fi\0" \- \
- "bootcmd_sata0=setenv devnum 0; run sata_boot;\0"
- "bootcmd_sata1=setenv devnum 1; run sata_boot;\0"
+#define BOOT_TARGETS_USB "sata0 sata1"
Typo, s/USB/SATA/
will fix
+#ifdef CONFIG_CMD_DHCP +#define BOOTCMDS_DHCP \
- "bootcmd_dhcp=" \
BOOTCMD_INIT_USB \Why BOOTCMD_INIT_USB here? For USB based networking? If so, add some comments please.
It was Copied from tegra-common-post.h im assuming that it to support booting from a usb attached nic
"if dhcp ${scriptaddr} boot.scr.uimg; then "\"source ${scriptaddr}; " \"fi\0"This relies on autoload being true, so we should set that.
okay, will fix it up.
Thanks
Dennis