On 8/17/2012 0:01, Andreas Bießmann wrote:
A lot of at91 boards have the console_init_f in board_init. This is useless cause it was called before by generic code in lib/board.c.
Signed-off-by: Andreas Bießmann andreas.devel@googlemail.com cc: Jens Scharsig esw@bus-elektronik.de cc: Stelian Pop stelian@popies.net cc: Sedji Gaouaousedji.gaouaou@atmel.com cc: Albin Tonnerre albin.tonnerre@free-electrons.com cc: Eric Benard eric@eukrea.com
board/BuS/eb_cpux9k2/cpux9k2.c | 2 -- board/BuS/vl_ma2sc/vl_ma2sc.c | 3 --- board/atmel/at91sam9261ek/at91sam9261ek.c | 3 --- board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 3 --- board/atmel/at91sam9rlek/at91sam9rlek.c | 3 --- board/calao/sbc35_a9g20/sbc35_a9g20.c | 3 --- board/calao/tny_a9260/tny_a9260.c | 3 --- board/eukrea/cpuat91/cpuat91.c | 2 -- 8 files changed, 22 deletions(-)
diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c index 54f9b64..776226f 100644 --- a/board/BuS/eb_cpux9k2/cpux9k2.c +++ b/board/BuS/eb_cpux9k2/cpux9k2.c @@ -59,8 +59,6 @@ DECLARE_GLOBAL_DATA_PTR; int board_init(void) { at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
/* Enable Ctrlc */
console_init_f();
/* Correct IRDA resistor problem / Set PA23_TXD in Output */ writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);
diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c index 62ed6fb..84b2060 100644 --- a/board/BuS/vl_ma2sc/vl_ma2sc.c +++ b/board/BuS/vl_ma2sc/vl_ma2sc.c @@ -244,9 +244,6 @@ int board_init(void) writel(pin, &pio->piod.odr); writel(pin, &pio->piod.owdr);
- /* Enable Ctrlc */
- console_init_f();
- gd->bd->bi_arch_number = MACH_TYPE_VL_MA2SC; /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index 47ab839..d30a1ee 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -242,9 +242,6 @@ void lcd_show_board_info(void)
int board_init(void) {
- /* Enable Ctrlc */
- console_init_f();
Tested on at91sam9g10ek board. It works well without this.
#ifdef CONFIG_AT91SAM9G10EK /* arch number of AT91SAM9G10EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK; diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index 5a04274..d02312c 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -258,9 +258,6 @@ int board_early_init_f(void)
int board_init(void) {
- /* Enable Ctrlc */
- console_init_f();
Tested on at91sam9m10g45ek board. It works well without this.
/* arch number of AT91SAM9M10G45EK-Board */ #ifdef CONFIG_AT91SAM9M10G45EK gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK; diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index ef0ddd7..e92ec6e 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -192,9 +192,6 @@ int board_early_init_f(void)
int board_init(void) {
- /* Enable Ctrlc */
- console_init_f();
- /* arch number of AT91SAM9RLEK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK; /* adress of boot parameters */
diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c index b6c8791..d3b3684 100644 --- a/board/calao/sbc35_a9g20/sbc35_a9g20.c +++ b/board/calao/sbc35_a9g20/sbc35_a9g20.c @@ -149,9 +149,6 @@ static void sbc35_a9g20_macb_hw_init(void)
int board_init(void) {
- /* Enable Ctrlc */
- console_init_f();
- /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
diff --git a/board/calao/tny_a9260/tny_a9260.c b/board/calao/tny_a9260/tny_a9260.c index 31074d0..86e7e65 100644 --- a/board/calao/tny_a9260/tny_a9260.c +++ b/board/calao/tny_a9260/tny_a9260.c @@ -83,9 +83,6 @@ static void tny_a9260_nand_hw_init(void)
int board_init(void) {
- /* Enable Ctrlc */
- console_init_f();
- /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
diff --git a/board/eukrea/cpuat91/cpuat91.c b/board/eukrea/cpuat91/cpuat91.c index f654f87..c74c3fc 100644 --- a/board/eukrea/cpuat91/cpuat91.c +++ b/board/eukrea/cpuat91/cpuat91.c @@ -43,8 +43,6 @@ DECLARE_GLOBAL_DATA_PTR;
int board_init(void) {
- /* Enable Ctrlc */
- console_init_f(); /* arch number of CPUAT91-Board */ gd->bd->bi_arch_number = MACH_TYPE_CPUAT91; /* adress of boot parameters */