Using a separate "u-boot" environment variable allows to easily specify different filenames for the update procedure. This is also in line with many other board configurations defining an "update" script.
Signed-off-by: Detlev Zundel dzu@denx.de CC: Stefan Roese sr@denx.de --- include/configs/amcc-common.h | 8 +++++--- 1 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index a2b7ee8..51128a3 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2008 + * (C) Copyright 2008, 2009 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * Common configuration options for all AMCC boards @@ -271,7 +271,8 @@ "bootm ${kernel_addr_r}\0"
#define CONFIG_AMCC_DEF_ENV_NOR_UPD \ - "load=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ + "load=tftp 200000 ${u-boot}\0" \ "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \ "era " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \ "cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize};" \ @@ -279,7 +280,8 @@ "upd=run load update\0" \
#define CONFIG_AMCC_DEF_ENV_NAND_UPD \ - "nload=tftp 200000 " xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0" \ + "u-boot-nand=" xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0" \ + "nload=tftp 200000 ${u-boot-nand}\0" \ "nupdate=nand erase 0 100000;nand write 200000 0 100000;" \ "setenv filesize;saveenv\0" \ "nupd=run nload nupdate\0"