12 Aug
2020
12 Aug
'20
5:11 p.m.
On 12/08/2020 15:53, Tom Rini wrote:
On Wed, Aug 12, 2020 at 03:08:14PM +0100, Usama Arif wrote:
Total Compute is based on ARM architecture and has the following features enabled in u-boot:
- PL011 UART
- PL180 MMC
- NOR Flash
- FIT image with Signature
- AVB
Signed-off-by: Usama Arif usama.arif@arm.com
Changes for v2:
- Added arch/arm/dts/total_compute.dts to board/armltd/total_compute/MAINTAINERS
- Added bootm_size of 512 MB for total compute board.
[snip]
+#define CONFIG_EXTRA_ENV_SETTINGS \
"bootm_size=0x20000000\0" \"load_addr=0xa0000000\0" \"kernel_addr_r=0x80080000\0" \"initrd_addr_r=0x88000000\0" \"fdt_addr_r=0x83000000\0" \"fdt_high=0xffffffffffffffff\0" \"initrd_high=0xffffffffffffffff\0"You need to drop fdt_high/initrd_high too as that's disabling relocation and that is almost never the right choice. Thanks!
Removed fdt_high and initrd_high in v3 to allow relocation. Thanks again for the review.
Usama