[U-Boot] [PATCH v2 0/1] Pass board revision and serial number to the

Raspberry Pi proprietary bootloader adds this information to the device tree to finally land in /proc/cpuinfo.

It is then used by some userspace tools. In particular `gpio` tool from WiringPi suite would use the wrong register mapping when this information is missing from /proc/cpuinfo.

Anton Gerasimov (1): board: raspberrypi: add serial and revision to the device tree

board/raspberrypi/rpi/rpi.c | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-)