Hi Lin,
On 9 November 2015 at 00:02, Lin Huang hl@rock-chips.com wrote:
This add some basic files required to allow the board to dispaly serial message and can run command(mmc info etc)
Signed-off-by: Lin Huang hl@rock-chips.com
Changes in v1:
- clean copyright announcement
Changes in v2:
- get sdram info from evb_rk3036.c
Changes in v3:
- delete some config
Changes in v4: None
arch/arm/dts/Makefile | 3 +- arch/arm/dts/rk3036-sdk.dts | 46 ++++++++++++++++++++++++++++++ board/evb_rk3036/evb_rk3036/Kconfig | 15 ++++++++++ board/evb_rk3036/evb_rk3036/MAINTAINERS | 0 board/evb_rk3036/evb_rk3036/Makefile | 7 +++++ board/evb_rk3036/evb_rk3036/evb_rk3036.c | 48 ++++++++++++++++++++++++++++++++ configs/evb-rk3036_defconfig | 25 +++++++++++++++++ include/configs/evb_rk3036.h | 12 ++++++++ 8 files changed, 155 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/rk3036-sdk.dts create mode 100644 board/evb_rk3036/evb_rk3036/Kconfig create mode 100644 board/evb_rk3036/evb_rk3036/MAINTAINERS create mode 100644 board/evb_rk3036/evb_rk3036/Makefile create mode 100644 board/evb_rk3036/evb_rk3036/evb_rk3036.c create mode 100644 configs/evb-rk3036_defconfig create mode 100644 include/configs/evb_rk3036.h
I wonder if there is a better way to get the SDRAM config, but this will do for now.
Acked-by: Simon Glass sjg@chromium.org
Regards, Simon