Hello Viktor?
On 19-09-14 16:01, nohabviktor wrote:
I have a LPC1788 board with 32Mbyte RAM and NAND flash and I followed the nxp instructions: http://www.lpcware.com/content/project/lpc177x8x-u-boot-port/u-boot-build-pr...
The result is: U-Boot 2011.06 (Aug 16 2011 - 16:47:50)
NXP LPC1788 Cortex-M3 DRAM: 32 MiB Flash: e1z K!A NAND: y2x#Mi #foeid !f pide 65472+ vedsigz 0@&1 #fojd !f pide 65408+ vedsigz 0@&1 pro!whoe "sadiyg fd "hocK!tae naf_rued_Zbt:8@adnaf_rued_Zbt:8@ad``lokk ad40x000000120000ztae naf_rued_Zbt:8@ad``lokk ad40x000000140x00ztae naf_rued_Zbt:8@adnaf_rued_Zbt:8@ad``lokk ad40x000000180000 tae naf_rued_Zbt:8@ad``lokk ad40x0000001a0000ztae naf_rued_Zbt:8@adnaf_rued_Zbt:8@ad``lokk ad40x0000001e0000ztae sd rom(kffpt 40000 fa9xed***0Wa {viznm-|tdenv() failedL!usYxg `fa}{t
In: serial Out: serial Err: serial uboot>
I send a 'help' command:
uboot> he Uncmow0coMkan0'he'x9 trl 'uboot> uboot>
I switch on the debug mode and I realized the printf and vsprintf not working correctly after the relocated on the ram. The puts function is works fine all the time. I tried the u-boot.hex from the nxp and tthe result is same. I have no idea whats the problem. Please help me!
I doubt there are NXP people active over here, so you might need to ask it themselves. Google says [1] might have support for mentioned board. (I have no idea though if it builds or boots).
Regards, Jeroen
[1] https://github.com/EmcraftSystems/u-boot/blob/master/board/nxp/ea-lpc1788/bo...