On 03/23/2017 01:19 AM, Sumit Garg wrote:
From: Vinitha Pillai-B57223 vinitha.pillai@nxp.com
Define bootscript and its header addresses for QSPI target. Also define PPA header address to enable PPA validation.
Signed-off-by: Vinitha Pillai vinitha.pillai@nxp.com Signed-off-by: Sumit Garg sumit.garg@nxp.com
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 1 + arch/arm/include/asm/arch-fsl-layerscape/config.h | 2 +- arch/arm/include/asm/fsl_secure_boot.h | 18 ++++++++++++++---- 3 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 10efb8c..fbb6642 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -159,6 +159,7 @@ config SYS_LS_PPA_ESBC_ADDR hex "hdr address of PPA firmware loading from" depends on FSL_LS_PPA && CHAIN_OF_TRUST default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
- default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
Why isn't the offset consistent?
help If the PPA header firmware locate at XIP flash, such as NOR or QSPI flash, this address is a directly memory-mapped. diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index b5b08aa..1f22afd 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -199,7 +199,7 @@
#define CONFIG_SYS_FSL_IFC_BE #define CONFIG_SYS_FSL_SFP_VER_3_2 -#define CONFIG_SYS_FSL_SNVS_LE +#define CONFIG_SYS_FSL_SEC_MON_BE #define CONFIG_SYS_FSL_SFP_BE #define CONFIG_SYS_FSL_SRK_LE #define CONFIG_KEY_REVOCATION diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index a1a3004..423c2c4 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -46,9 +46,10 @@
#endif
-#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A) -/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit
- Similiarly for LS2080
+#if defined(CONFIG_FSL_LAYERSCAPE) +/*
- For fsl layerscape based platforms, ESBC image Address in Header
*/
- is 64 bit.
#define CONFIG_ESBC_ADDR_64BIT #endif @@ -90,12 +91,21 @@ #define CONFIG_BS_ADDR_DEVICE 0x00000940 #define CONFIG_BS_HDR_SIZE 0x00000010 #define CONFIG_BS_SIZE 0x00000008 +#elif defined(CONFIG_QSPI_BOOT) +#ifdef CONFIG_ARCH_LS1046A +#define CONFIG_BS_HDR_ADDR_DEVICE 0x40780000 +#define CONFIG_BS_ADDR_DEVICE 0x40800000 #else +#error "Platform not supported" +#endif +#define CONFIG_BS_HDR_SIZE 0x00002000 +#define CONFIG_BS_SIZE 0x00001000 +#else /* Default NOR Boot */ #define CONFIG_BS_HDR_ADDR_DEVICE 0x600a0000 #define CONFIG_BS_ADDR_DEVICE 0x60060000 #define CONFIG_BS_HDR_SIZE 0x00002000 #define CONFIG_BS_SIZE 0x00001000 -#endif /* #ifdef CONFIG_SD_BOOT */ +#endif #define CONFIG_BS_HDR_ADDR_RAM 0x81000000 #define CONFIG_BS_ADDR_RAM 0x81020000 #endif
Please consider to move these to Kconfig in the future.
York