When the boot ROM sets up MMC we don't need to do it again. Remove the MMC setup code entirely.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v2: None
arch/arm/mach-rockchip/rk3288-board-spl.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c index e133cca..30f874a 100644 --- a/arch/arm/mach-rockchip/rk3288-board-spl.c +++ b/arch/arm/mach-rockchip/rk3288-board-spl.c @@ -114,7 +114,6 @@ static void configure_l2ctlr(void) #ifdef CONFIG_SPL_MMC_SUPPORT static int configure_emmc(struct udevice *pinctrl) { -#if !defined(CONFIG_TARGET_ROCK2) && !defined(CONFIG_TARGET_FIREFLY_RK3288) struct gpio_desc desc; int ret;
@@ -144,7 +143,6 @@ static int configure_emmc(struct udevice *pinctrl) debug("gpio value ret=%d\n", ret); return ret; } -#endif
return 0; } @@ -247,15 +245,18 @@ void spl_board_init(void) goto err; } #ifdef CONFIG_SPL_MMC_SUPPORT - ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); - if (ret) { - debug("%s: Failed to set up SD card\n", __func__); - goto err; - } - ret = configure_emmc(pinctrl); - if (ret) { - debug("%s: Failed to set up eMMC\n", __func__); - goto err; + if (!IS_ENABLED(CONFIG_TARGET_ROCK2) && + !IS_ENABLED(CONFIG_TARGET_FIREFLY_RK3288)) { + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); + if (ret) { + debug("%s: Failed to set up SD card\n", __func__); + goto err; + } + ret = configure_emmc(pinctrl); + if (ret) { + debug("%s: Failed to set up eMMC\n", __func__); + goto err; + } } #endif