Hi Jagan,
On 27/05/20 6:26 pm, Jagan Teki wrote:
DM, DM_SPI and other driver model migration deadlines are expired for this board.
Drop it.
Cc: Lokesh Vutla lokeshvutla@ti.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com
Please hold this patch. I see patches in ML for converting to DM https://patchwork.ozlabs.org/project/uboot/list/?series=180809
Thanks and regards, Lokesh
Changes for v2:
- none
arch/arm/mach-omap2/omap4/Kconfig | 4 - board/ti/panda/Kconfig | 12 -- board/ti/panda/MAINTAINERS | 6 - board/ti/panda/Makefile | 6 - board/ti/panda/panda.c | 346 ------------------------------ board/ti/panda/panda_mux_data.h | 86 -------- configs/omap4_panda_defconfig | 42 ---- include/configs/omap4_panda.h | 34 --- 8 files changed, 536 deletions(-) delete mode 100644 board/ti/panda/Kconfig delete mode 100644 board/ti/panda/MAINTAINERS delete mode 100644 board/ti/panda/Makefile delete mode 100644 board/ti/panda/panda.c delete mode 100644 board/ti/panda/panda_mux_data.h delete mode 100644 configs/omap4_panda_defconfig delete mode 100644 include/configs/omap4_panda.h
diff --git a/arch/arm/mach-omap2/omap4/Kconfig b/arch/arm/mach-omap2/omap4/Kconfig index 899289b645..4cc360f38a 100644 --- a/arch/arm/mach-omap2/omap4/Kconfig +++ b/arch/arm/mach-omap2/omap4/Kconfig @@ -4,9 +4,6 @@ choice prompt "OMAP4 board select" optional
-config TARGET_OMAP4_PANDA
- bool "TI OMAP4 PandaBoard"
config TARGET_OMAP4_SDP4430 bool "TI OMAP4 SDP4430"
@@ -18,7 +15,6 @@ endchoice config SYS_SOC default "omap4"
-source "board/ti/panda/Kconfig" source "board/ti/sdp4430/Kconfig" source "board/amazon/kc1/Kconfig"
diff --git a/board/ti/panda/Kconfig b/board/ti/panda/Kconfig deleted file mode 100644 index 8f277b612a..0000000000 --- a/board/ti/panda/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_OMAP4_PANDA
-config SYS_BOARD
- default "panda"
-config SYS_VENDOR
- default "ti"
-config SYS_CONFIG_NAME
- default "omap4_panda"
-endif diff --git a/board/ti/panda/MAINTAINERS b/board/ti/panda/MAINTAINERS deleted file mode 100644 index 2142368271..0000000000 --- a/board/ti/panda/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -PANDA BOARD -M: Lokesh Vutla lokeshvutla@ti.com -S: Maintained -F: board/ti/panda/ -F: include/configs/omap4_panda.h -F: configs/omap4_panda_defconfig diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile deleted file mode 100644 index dd2ff33afa..0000000000 --- a/board/ti/panda/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-obj-y := panda.o diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c deleted file mode 100644 index 9ebecfdbf5..0000000000 --- a/board/ti/panda/panda.c +++ /dev/null @@ -1,346 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/*
- (C) Copyright 2010
- Texas Instruments Incorporated, <www.ti.com>
- Steve Sakoman steve@sakoman.com
- */
-#include <common.h> -#include <init.h> -#include <log.h> -#include <net.h> -#include <asm/mach-types.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/clock.h> -#include <asm/arch/gpio.h> -#include <asm/gpio.h> -#include <env.h> -#include <twl6030.h>
-#include "panda_mux_data.h"
-#ifdef CONFIG_USB_EHCI_HCD -#include <usb.h> -#include <asm/arch/ehci.h> -#include <asm/ehci-omap.h> -#endif
-#define PANDA_ULPI_PHY_TYPE_GPIO 182 -#define PANDA_BOARD_ID_1_GPIO 101 -#define PANDA_ES_BOARD_ID_1_GPIO 48 -#define PANDA_BOARD_ID_2_GPIO 171 -#define PANDA_ES_BOARD_ID_3_GPIO 3 -#define PANDA_ES_BOARD_ID_4_GPIO 2
-DECLARE_GLOBAL_DATA_PTR;
-const struct omap_sysinfo sysinfo = {
- "Board: OMAP4 Panda\n"
-};
-struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000;
-/**
- @brief board_init
- @return 0
- */
-int board_init(void) -{
- gpmc_init();
- gd->bd->bi_arch_number = MACH_TYPE_OMAP4_PANDA;
- gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
- return 0;
-}
-int board_eth_init(bd_t *bis) -{
- return 0;
-}
-/* -* Routine: get_board_revision -* Description: Detect if we are running on a panda revision A1-A6, -* or an ES panda board. This can be done by reading -* the level of GPIOs and checking the processor revisions. -* This should result in: -* Panda 4430: -* GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5 -* GPIO171, GPIO101, GPIO182: 1 0 1 => A6 -* Panda ES: -* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2 -* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3 -*/ -int get_board_revision(void) -{
- int board_id0, board_id1, board_id2;
- int board_id3, board_id4;
- int board_id;
- int processor_rev = omap_revision();
- /* Setup the mux for the common board ID pins (gpio 171 and 182) */
- writew((IEN | M3), (*ctrl)->control_padconf_core_base + UNIPRO_TX0);
- writew((IEN | M3), (*ctrl)->control_padconf_core_base + FREF_CLK2_OUT);
- board_id0 = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
- board_id2 = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
- if ((processor_rev >= OMAP4460_ES1_0 &&
processor_rev <= OMAP4460_ES1_1)) {/** Setup the mux for the ES specific board ID pins (gpio 101,* 2 and 3.*/writew((IEN | M3), (*ctrl)->control_padconf_core_base +GPMC_A24);writew((IEN | M3), (*ctrl)->control_padconf_core_base +UNIPRO_RY0);writew((IEN | M3), (*ctrl)->control_padconf_core_base +UNIPRO_RX1);board_id1 = gpio_get_value(PANDA_ES_BOARD_ID_1_GPIO);board_id3 = gpio_get_value(PANDA_ES_BOARD_ID_3_GPIO);board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO);-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
env_set("board_name", "panda-es");-#endif
board_id = ((board_id4 << 4) | (board_id3 << 3) |(board_id2 << 2) | (board_id1 << 1) | (board_id0));- } else {
/* Setup the mux for the Ax specific board ID pins (gpio 101) */writew((IEN | M3), (*ctrl)->control_padconf_core_base +FREF_CLK2_OUT);board_id1 = gpio_get_value(PANDA_BOARD_ID_1_GPIO);board_id = ((board_id2 << 2) | (board_id1 << 1) | (board_id0));-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3))env_set("board_name", "panda-a4");-#endif
- }
- return board_id;
-}
-/**
- is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES
- Detect if we are running on B3 version of ES panda board,
- This can be done by reading the level of GPIO 171 and checking the
- processor revisions.
- GPIO171: 1 => Panda ES Rev B3
- Return : return 1 if Panda ES Rev B3 , else return 0
- */
-u8 is_panda_es_rev_b3(void) -{
int processor_rev = omap_revision();int ret = 0;if ((processor_rev >= OMAP4460_ES1_0 &&processor_rev <= OMAP4460_ES1_1)) {/* Setup the mux for the common board ID pins (gpio 171) */writew((IEN | M3),(*ctrl)->control_padconf_core_base + UNIPRO_TX0);/* if processor_rev is panda ES and GPIO171 is 1,it is rev b3 */ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO);}return ret;-}
-#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -/*
- emif_get_reg_dump() - emif_get_reg_dump strong function
- @emif_nr - emif base
- @regs - reg dump of timing values
- Strong function to override emif_get_reg_dump weak function in sdram_elpida.c
- */
-void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) -{
- u32 omap4_rev = omap_revision();
- /* Same devices and geometry on both EMIFs */
- if (omap4_rev == OMAP4430_ES1_0)
*regs = &emif_regs_elpida_380_mhz_1cs;- else if (omap4_rev == OMAP4430_ES2_0)
*regs = &emif_regs_elpida_200_mhz_2cs;- else if (omap4_rev == OMAP4430_ES2_3)
*regs = &emif_regs_elpida_400_mhz_1cs;- else if (omap4_rev < OMAP4470_ES1_0) {
if(is_panda_es_rev_b3())*regs = &emif_regs_elpida_400_mhz_1cs;else*regs = &emif_regs_elpida_400_mhz_2cs;- }
- else
*regs = &emif_regs_elpida_400_mhz_1cs;-}
-void emif_get_dmm_regs(const struct dmm_lisa_map_regs
**dmm_lisa_regs)-{
- u32 omap_rev = omap_revision();
- if (omap_rev == OMAP4430_ES1_0)
*dmm_lisa_regs = &lisa_map_2G_x_1_x_2;- else if (omap_rev == OMAP4430_ES2_3)
*dmm_lisa_regs = &lisa_map_2G_x_2_x_2;- else if (omap_rev < OMAP4460_ES1_0)
*dmm_lisa_regs = &lisa_map_2G_x_2_x_2;- else
*dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2;-}
-#endif
-/**
- @brief misc_init_r - Configure Panda board specific configurations
- such as power configurations, ethernet initialization as phase2 of
- boot sequence
- @return 0
- */
-int misc_init_r(void) -{
- int phy_type;
- u32 auxclk, altclksrc;
- /* EHCI is not supported on ES1.0 */
- if (omap_revision() == OMAP4430_ES1_0)
return 0;- get_board_revision();
- gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO);
- phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
- if (phy_type == 1) {
/* ULPI PHY supplied by auxclk3 derived from sys_clk */debug("ULPI PHY supplied by auxclk3\n");auxclk = readl(&scrm->auxclk3);/* Select sys_clk */auxclk &= ~AUXCLK_SRCSELECT_MASK;auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT;/* Set the divisor to 2 */auxclk &= ~AUXCLK_CLKDIV_MASK;auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT;/* Request auxilary clock #3 */auxclk |= AUXCLK_ENABLE_MASK;writel(auxclk, &scrm->auxclk3);- } else {
/* ULPI PHY supplied by auxclk1 derived from PER dpll */debug("ULPI PHY supplied by auxclk1\n");auxclk = readl(&scrm->auxclk1);/* Select per DPLL */auxclk &= ~AUXCLK_SRCSELECT_MASK;auxclk |= AUXCLK_SRCSELECT_PER_DPLL << AUXCLK_SRCSELECT_SHIFT;/* Set the divisor to 16 */auxclk &= ~AUXCLK_CLKDIV_MASK;auxclk |= AUXCLK_CLKDIV_16 << AUXCLK_CLKDIV_SHIFT;/* Request auxilary clock #3 */auxclk |= AUXCLK_ENABLE_MASK;writel(auxclk, &scrm->auxclk1);- }
- altclksrc = readl(&scrm->altclksrc);
- /* Activate alternate system clock supplier */
- altclksrc &= ~ALTCLKSRC_MODE_MASK;
- altclksrc |= ALTCLKSRC_MODE_ACTIVE;
- /* enable clocks */
- altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK;
- writel(altclksrc, &scrm->altclksrc);
- omap_die_id_usbethaddr();
- return 0;
-}
-void set_muxconf_regs(void) -{
- do_set_mux((*ctrl)->control_padconf_core_base,
core_padconf_array_essential,sizeof(core_padconf_array_essential) /sizeof(struct pad_conf_entry));- do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_essential,sizeof(wkup_padconf_array_essential) /sizeof(struct pad_conf_entry));- if (omap_revision() >= OMAP4460_ES1_0)
do_set_mux((*ctrl)->control_padconf_wkup_base,wkup_padconf_array_essential_4460,sizeof(wkup_padconf_array_essential_4460) /sizeof(struct pad_conf_entry));-}
-#if defined(CONFIG_MMC) -int board_mmc_init(bd_t *bis) -{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#if !defined(CONFIG_SPL_BUILD) -void board_mmc_power_init(void) -{
- twl6030_power_mmc_init(0);
-} -#endif -#endif
-#ifdef CONFIG_USB_EHCI_HCD
-static struct omap_usbhs_board_data usbhs_bdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)-{
- int ret;
- unsigned int utmi_clk;
- /* Now we can enable our port clocks */
- utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL);
- utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK;
- setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk);
- ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
- if (ret < 0)
return ret;- return 0;
-}
-int ehci_hcd_stop(int index) -{
- return omap_ehci_hcd_stop();
-} -#endif
-/*
- get_board_rev() - get board revision
- */
-u32 get_board_rev(void) -{
- return 0x20;
-} diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h deleted file mode 100644 index ad9e36525b..0000000000 --- a/board/ti/panda/panda_mux_data.h +++ /dev/null @@ -1,86 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/*
- (C) Copyright 2010
- Texas Instruments Incorporated, <www.ti.com>
- Balaji Krishnamoorthy balajitk@ti.com
- Aneesh V aneesh@ti.com
- */
-#ifndef _PANDA_MUX_DATA_H_ -#define _PANDA_MUX_DATA_H_
-#include <asm/arch/mux_omap4.h>
-const struct pad_conf_entry core_padconf_array_essential[] = {
-{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */ -{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */ -{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */ -{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */ -{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */ -{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */ -{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */ -{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */ -{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */ -{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */ -{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */ -{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */ -{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */ -{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */ -{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */ -{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */ -{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */ -{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */ -{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */ -{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */ -{I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ -{I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ -{I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ -{I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ -{I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ -{I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ -{I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ -{I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */ -{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ -{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ -{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ -{UART3_TX_IRTX, (M0)}, /* uart3_tx */ -{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */ -{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */ -{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */ -{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */ -{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */ -{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */ -{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */ -{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */ -{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */ -{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */ -{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */ -{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */ -{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */ -{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */ -{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */ -{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */ -{UNIPRO_TY2, (PTU | IEN | M3)}, /* gpio_1 */ -{GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */ -{FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */
-};
-const struct pad_conf_entry wkup_padconf_array_essential[] = {
-{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ -{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ -{PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */ -{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
-};
-const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
-{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 for TPS: Mode 3 */
-};
-#endif /* _PANDA_MUX_DATA_H_ */ diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig deleted file mode 100644 index 3ac6319d2d..0000000000 --- a/configs/omap4_panda_defconfig +++ /dev/null @@ -1,42 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_OMAP44XX=y -CONFIG_TARGET_OMAP4_PANDA=y -CONFIG_SPL=y -CONFIG_SPL_TEXT_BASE=0x40300000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd" -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -# CONFIG_SPL_FS_EXT4 is not set -# CONFIG_SPL_I2C_SUPPORT is not set -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_OS_BOOT=y -CONFIG_CMD_SPL=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set -CONFIG_CMD_EXT4_WRITE=y -CONFIG_ENV_IS_IN_FAT=y -CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_MMC_OMAP_HS=y -CONFIG_CONS_INDEX=3 -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_MUSB_UDC=y -CONFIG_USB_OMAP3=y -CONFIG_USB_GADGET=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h deleted file mode 100644 index 835b7c299e..0000000000 --- a/include/configs/omap4_panda.h +++ /dev/null @@ -1,34 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/*
- (C) Copyright 2010
- Texas Instruments Incorporated.
- Steve Sakoman steve@sakoman.com
- Configuration settings for the TI OMAP4 Panda board.
- See ti_omap4_common.h for OMAP4 common part
- */
-#ifndef __CONFIG_PANDA_H -#define __CONFIG_PANDA_H
-/*
- High Level Configuration Options
- */
-/* USB UHH support options */ -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1 -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
-/* USB Networking options */
-#define CONFIG_UBOOT_ENABLE_PADS_ALL
-#include <configs/ti_omap4_common.h>
-/* GPIO */
-/* ENV related config options */
-#define CONFIG_ENV_OVERWRITE
-#endif /* __CONFIG_PANDA_H */