Re: [U-Boot] [PATCH] Add bank configuration to FSL spd_sdram.c

The routine assumed 4 bank SDRAMs, enhance to configure for 4 or 8 bank SDRAMs.

Signed-off-by: Gerald Van Baren vanbaren@cideas.com

I haven't made much headway on adapting the cpu/mpc8xxxx/ddr routines to the 83xx (8360). It has some 85xx (86xx) assumptions in that needs to be pulled out.

Meanwhile, the cpu/mpc83xx/spd_sdram.c routine /almost/ worked for me. It turns out my DIMM stick has 8 banks which was being ignored (hard-coded for 4 banks). The enhancement below fixed that for me.

It would be Really Good to get this verified and in the pending release.

Could you also make the same change to #CS2# and #CS3?

Thanks, Dave