On 9/11/24 13:29, Sughosh Ganu wrote:
On Wed, 11 Sept 2024 at 16:53, Michal Simek michal.simek@amd.com wrote:
On 9/11/24 13:20, Sughosh Ganu wrote:
On Tue, 10 Sept 2024 at 21:14, Prasad Kummari prasad.kummari@amd.com wrote:
Added LMB API to prevent SF command from overwriting reserved memory areas. The current SPI code does not use LMB APIs for loading data into memory addresses. To resolve this, LMB APIs were added to check the load address of an SF command and ensure it does not overwrite reserved memory addresses. Similar checks are used in TFTP, serial load, and boot code to prevent overwriting reserved memory.
Signed-off-by: Prasad Kummari prasad.kummari@amd.com
Changes in V3:
- Removed lmb_init_and_reserve() as part of latest LMB series.
- Error message moved to one place.
- lmb_alloc_addr() is not required because the given memory address is being checked to ensure it is free or not.
Changes in V2:
- Rebased the code changes on top of the next branch.
UT: Tested on Versal NET board
Versal NET> fdt print /reserved-memory reserved-memory { ranges; #size-cells = <0x00000002>; #address-cells = <0x00000002>; tf-a { reg = <0x00000000 0x70000000 0x00000000 0x00050000>; no-map; }; }; Versal NET> sf read 0x70000000 0x0 0x40 device 0 offset 0x0, size 0x40 ERROR: trying to overwrite reserved memory...
Versal NET> sf write 0x70000000 0x0 0x40 device 0 offset 0x0, size 0x40 ERROR: trying to overwrite reserved memory...
relocaddr = 0x000000007febc000
Versal NET> sf read 0x000000007febc000 0x0 0x40 device 0 offset 0x0, size 0x40 ERROR: trying to overwrite reserved memory...
Versal NET> sf write 0x000000007febc000 0x0 0x40 device 0 offset 0x0, size 0x40 ERROR: trying to overwrite reserved memory...
cmd/sf.c | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-)
diff --git a/cmd/sf.c b/cmd/sf.c index f43a2e08b3..7bb8bcfce2 100644 --- a/cmd/sf.c +++ b/cmd/sf.c @@ -10,6 +10,7 @@ #include <div64.h> #include <dm.h> #include <log.h> +#include <lmb.h> #include <malloc.h> #include <mapmem.h> #include <spi.h> @@ -272,6 +273,31 @@ static int spi_flash_update(struct spi_flash *flash, u32 offset, return 0; }
+#ifdef CONFIG_LMB +static int do_spi_read_lmb_check(ulong start_addr, loff_t len) +{
phys_size_t max_size;ulong end_addr;lmb_dump_all();max_size = lmb_get_free_size(start_addr);if (!max_size) {return CMD_RET_FAILURE;}end_addr = start_addr + max_size;if (!end_addr)end_addr = ULONG_MAX;if ((start_addr + len) > end_addr) {return CMD_RET_FAILURE;}This is one way to get the load address, yes. But please do note that with this method, if the region of memory has already been marked as reserved, the call to lmb_get_free_size() will fail, i.e. return a value of 0. Whereas if you call lmb_alloc_addr(), and if the memory region is marked reserved with the flags set to LMB_NONE, that call will not fail, as we can re-reserve memory marked as LMB_NONE. Hence a better approach would be to use the logic used in the fs module function that I had pointed to in my earlier email.
Also, like I mentioned earlier, it will be better to refactor the functionality, especially if the plan is to introduce this check for loading stuff through other interfaces like nand, mmc etc. You can add a function in the lmb.c like lmb_read_check() which does that.
Is this something what you are going to work on?
Can that not be done as part of this work? It is about having a single function in the lmb.c file, which simply does a check for lmb_alloc_addr(). It's not very complicated tbh.
It is more about time spent on it. If you know how exactly it should look like it would be easier for you to put it together and Prasad can validate it on our platforms.
Thanks, Michal