Hi, Wolfgang
Felix Radensky wrote:
Hi, Wolfgang
--------------------------------------^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Did you try running in another configuration, like 800-nor or 1066-nor?
I did try 600-nor and 800-nor, but that didn't change anything. With 1066-nor u-boot hangs earlier, the console messages show
U-Boot 2009.11-rc2-00002-g386118a (Dec 09 2009 - 18:48:44)
CPU: AMCC PowerPC 460EX Rev. A at 1066.667 MHz (PLB=266 OPB=88 EBC=88) Security/Kasumi support Bootstrap Option H - Boot ROM Location I2C (Addr 0x52) Internal PCI arbiter enabled 32 kB I-Cache 32 kB D-Cache Board: Canyonlands - AMCC PPC460EX Evaluation Board, 2*PCIe, Rev. 14 I2C: ready DRAM: 512 MB (ECC not enabled, 533 MHz, CL4)
Felix.
Actually, 1066-nor is not different from other configurations. Switching to 1066-nor requires power-cycle, it's not enough to simply run "reset" command. Anyway, in this configuration u-boot also hangs when PLX board is plugged in.
Felix.