Hi Ajay,
On Tue, Dec 11, 2012 at 3:01 AM, Ajay Kumar ajaykumar.rs@samsung.com wrote:
Add panel_info structure required by LCD driver and DP panel platdata for SMDK5250. Enable FIMD and DP support on SMDK5250. DP Panel size: 2560x1600. We use 16BPP resolution to get LCD console.
Signed-off-by: Ajay Kumar ajaykumar.rs@samsung.com
Acked-by: Simon Glass sjg@chromium.org
See suggestion below. I hope that this can be FDT-enabled later.
board/samsung/smdk5250/smdk5250.c | 82 +++++++++++++++++++++++++++++++++++++ include/configs/smdk5250.h | 9 ++++ 2 files changed, 91 insertions(+), 0 deletions(-)
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 4c50342..e3d6ac1 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -24,12 +24,15 @@ #include <asm/io.h> #include <i2c.h> #include <netdev.h> +#include <lcd.h> #include <spi.h> #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/power.h> #include <asm/arch/pinmux.h> #include <asm/arch/sromc.h> +#include <asm/arch/dp_info.h> #include <pmic.h>
DECLARE_GLOBAL_DATA_PTR; @@ -181,6 +184,85 @@ static int board_uart_init(void) return 0; }
+vidinfo_t panel_info = {
.vl_freq = 60,.vl_col = 2560,.vl_row = 1600,.vl_width = 2560,.vl_height = 1600,.vl_clkp = CONFIG_SYS_LOW,.vl_hsp = CONFIG_SYS_LOW,.vl_vsp = CONFIG_SYS_LOW,.vl_dp = CONFIG_SYS_LOW,.vl_bpix = 4, /* LCD_BPP = 2^4, for output conosle on LCD *//* wDP panel timing infomation */.vl_hspw = 32,.vl_hbpd = 80,.vl_hfpd = 48,.vl_vspw = 6,.vl_vbpd = 37,.vl_vfpd = 3,.vl_cmd_allow_len = 0xf,.win_id = 3,.cfg_gpio = NULL,.backlight_on = NULL,.lcd_power_on = NULL,.reset_lcd = NULL,.dual_lcd_enabled = 0,.init_delay = 0,.power_on_delay = 0,.reset_delay = 0,.interface_mode = FIMD_RGB_INTERFACE,.dp_enabled = 1,+};
+static struct edp_device_info edp_info = {
.disp_info = {.h_res = 2560,.h_sync_width = 32,.h_back_porch = 80,.h_front_porch = 48,.v_res = 1600,.v_sync_width = 6,.v_back_porch = 37,.v_front_porch = 3,.v_sync_rate = 60,},.lt_info = {.lt_status = DP_LT_NONE,},.video_info = {.master_mode = 0,.bist_mode = DP_DISABLE,.bist_pattern = NO_PATTERN,.h_sync_polarity = 0,.v_sync_polarity = 0,.interlaced = 0,.color_space = COLOR_RGB,.dynamic_range = VESA,.ycbcr_coeff = COLOR_YCBCR601,.color_depth = COLOR_8,},+};
+static struct exynos_dp_platform_data dp_platform_data = {
.phy_enable = set_dp_phy_ctrl,.edp_dev_info = &edp_info,+};
+void init_panel_info(vidinfo_t *vid) +{
vid->logo_on = 1,vid->rgb_mode = MODE_RGB_P,exynos_set_dp_platform_data(&dp_platform_data);exynos_pinmux_config(PERIPH_ID_LCD, NULL);+}
#ifdef CONFIG_SYS_I2C_INIT_BOARD static int board_i2c_init(void) { diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index e412da8..9489714 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -256,6 +256,15 @@ #define CONFIG_SOUND_WM8994 #endif
+/* Display */ +#define CONFIG_LCD +#define CONFIG_EXYNOS_FB +#define CONFIG_EXYNOS_DP +#define LCD_XRES 2560 +#define LCD_YRES 1600 +#define LCD_BPP LCD_COLOR16 +#define CONFIG_CMD_BMP
Perhaps CONFIG_LCD_BMP_RLE8 as well?
/* Enable devicetree support */ #define CONFIG_OF_LIBFDT
-- 1.7.1
Regards, Simon