From: Peng Fan peng.fan@nxp.com
This is to upstream NXP downstream i.MX8ULP patches including ADC/DRAM/LPAV/FUSE/ENET update/fix
Alice Guo (3): imx8ulp: clock: Support to enable/disable the ADC1 clock imx8ulp: measure die temperature using PMC Temperature Sensor imx8ulp: implement to obtain the SoC current temperature
Jacky Bai (1): imx8ulp:ddr: saving the dram config timing data into sram
Peng Fan (1): imx8ulp: assign PXP/HIFI4/EPDC to APD domain
Ye Li (15): imx8ulp: soc: Check the DBD_EN fuse before setting RDC arm: imx8ulp: Allocate LPAV resources to AP domain imx8ulp: clock: Support LPAV clocks in cgc and pcc imx8ulp: clock: Add MIPI DSI clock and DCNano clock imx8ulp: rdc: allow A35 access flexspi0 mem imx8ulp_evk: Control LPI2C0 PCA6416 and TPM0 for display imx8ulp: Set DCNANO read QoS on NIC_LPAV to highest imx8ulp: Fix DCNANO QoS setting imx8ulp: Remove freescale name from CPU revision imx8ulp: Workaround LPOSC_TRIM fuse load issue imx8ulp: clock: Reset DDR controller before clock enable imx8ulp: clock: Support to reset DCNano and MIPI DSI imx8ulp: Update ethernet mac to get from fuse imx8ulp: clock: Handle the DDRLOCKED when setting DDR clock imx8ulp: ddr: Fix DDR frequency request issue
arch/arm/include/asm/arch-imx8ulp/cgc.h | 37 +- arch/arm/include/asm/arch-imx8ulp/clock.h | 4 + arch/arm/include/asm/arch-imx8ulp/imx-regs.h | 63 +++- .../include/asm/arch-imx8ulp/imx8ulp-pins.h | 4 + arch/arm/include/asm/arch-imx8ulp/pcc.h | 70 +++- arch/arm/include/asm/arch-imx8ulp/sys_proto.h | 2 + arch/arm/mach-imx/imx8ulp/cgc.c | 325 +++++++++++++++--- arch/arm/mach-imx/imx8ulp/clock.c | 156 ++++++++- arch/arm/mach-imx/imx8ulp/pcc.c | 158 ++++++++- arch/arm/mach-imx/imx8ulp/soc.c | 117 ++++++- board/freescale/imx8ulp_evk/imx8ulp_evk.c | 56 +++ board/freescale/imx8ulp_evk/spl.c | 9 + drivers/ddr/imx/imx8ulp/Kconfig | 7 + drivers/ddr/imx/imx8ulp/ddr_init.c | 55 ++- drivers/thermal/Kconfig | 7 + drivers/thermal/Makefile | 1 + drivers/thermal/imx_pmc_temperature.c | 174 ++++++++++ 17 files changed, 1148 insertions(+), 97 deletions(-) create mode 100644 drivers/thermal/imx_pmc_temperature.c