Hi Prafulla,
Le 16/01/2012 09:32, Prafulla Wadaskar a écrit :
-----Original Message----- From: Albert ARIBAUD [mailto:albert.u.boot@aribaud.net] Sent: 16 January 2012 14:00 To: Prafulla Wadaskar Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2
Hi Prafulla,
Le 16/01/2012 09:20, Prafulla Wadaskar a écrit :
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot- bounces@lists.denx.de] On Behalf Of Albert ARIBAUD Sent: 16 January 2012 13:39 To: u-boot@lists.denx.de Subject: [U-Boot] [PATCH 0/4] Add USB support to orion5x and
edminiv2
This patch set adds USB support to the LaCie ED Mini V2 by renaming the 'kirkwood' USB driver a 'marvell' USB driver, sharing it
between
the orion5x SoC family and enabling it for the edminiv2 board.
(this is similar to what was done with the 'mvgbe' driver in
commits
9b6bcdcb to ab9164d0)
Hi Albert This is patch series tested on both the platforms- Kirkwood, Orion
for this change?
Otherwise, Acked-by: Prafulla WadaskarPrafulla@marvell.com
Regards.. Prafulla . ..
For kirkwood the code is just a bunch of renames with no functional impact, but I did test the patch set on kirkwood for build-time and run-time regressions while developing it.
However, since then I have rebased it a couple of times, and my openrd-client is currently not available for testing again. Could you possibly test it?
Okay I will do it in next week is that okay with you?
Don't bother: I've been lent another open-rd and I could run the u-boot image through openocd during lunch break. I've just tested usb start, usb tree with a mass storage USB key plugged in, usb info, usb part) and all works fine.
Regards.. Prafulla . .
Amicalement,