Re: [U-Boot] LCRR setting on XPEDITE5370 & XPEDITE5200

Hi Kumar,

I see you guys set LCRR in the config.h. You are using LCRR_CLKDIV_4. Do you think this means clk/4? (I ask because the defines aren't correct, and wasn't sure about your expectation).

I faintly remember punching the numbers for LCRR a while back, then blindly replacing the calculated LCRR value with the LCRR_* defines from fsl_lbc.h. So clk/8 is intended, but I didn't register that LCRR_CLKDIV_4 was a misnomer at the time.

Thanks for checking, I'll send a patch when I have some free time unless someone beats me to it.

Peter