Signed-off-by: Peter Tyser ptyser@xes-inc.com --- board/xpedite1k/init.S | 67 +++++++------- board/xpedite1k/u-boot.lds | 3 - board/xpedite1k/xpedite1k.c | 210 +++++++++++++++++++----------------------- include/configs/XPEDITE1K.h | 216 ++++++++++++++++++------------------------- 4 files changed, 218 insertions(+), 278 deletions(-)
diff --git a/board/xpedite1k/init.S b/board/xpedite1k/init.S index 8a04f4f..54371e2 100644 --- a/board/xpedite1k/init.S +++ b/board/xpedite1k/init.S @@ -1,5 +1,5 @@ /* -* Copyright (C) 2002 Scott McNutt smcnutt@artesyncp.com +* Copyright (C) 2002 Scott McNutt smcnutt@artesyncp.com * * See file CREDITS for list of people who contributed to this * project. @@ -24,62 +24,59 @@ #include <config.h>
/* General */ -#define TLB_VALID 0x00000200 +#define TLB_VALID 0x00000200
/* Supported page sizes */ - -#define SZ_1K 0x00000000 -#define SZ_4K 0x00000010 -#define SZ_16K 0x00000020 -#define SZ_64K 0x00000030 -#define SZ_256K 0x00000040 -#define SZ_1M 0x00000050 -#define SZ_16M 0x00000070 -#define SZ_256M 0x00000090 +#define SZ_1K 0x00000000 +#define SZ_4K 0x00000010 +#define SZ_16K 0x00000020 +#define SZ_64K 0x00000030 +#define SZ_256K 0x00000040 +#define SZ_1M 0x00000050 +#define SZ_16M 0x00000070 +#define SZ_256M 0x00000090
/* Storage attributes */ -#define SA_W 0x00000800 /* Write-through */ -#define SA_I 0x00000400 /* Caching inhibited */ -#define SA_M 0x00000200 /* Memory coherence */ -#define SA_G 0x00000100 /* Guarded */ -#define SA_E 0x00000080 /* Endian */ +#define SA_W 0x00000800 /* Write-through */ +#define SA_I 0x00000400 /* Caching inhibited */ +#define SA_M 0x00000200 /* Memory coherence */ +#define SA_G 0x00000100 /* Guarded */ +#define SA_E 0x00000080 /* Endian */
/* Access control */ -#define AC_X 0x00000024 /* Execute */ -#define AC_W 0x00000012 /* Write */ -#define AC_R 0x00000009 /* Read */ +#define AC_X 0x00000024 /* Execute */ +#define AC_W 0x00000012 /* Write */ +#define AC_R 0x00000009 /* Read */
/* Some handy macros */ - #define EPN(e) ((e) & 0xfffffc00) -#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) -#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) -#define TLB2(a) ( (a)&0x00000fbf ) +#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID )) +#define TLB1(rpn,erpn) (((rpn)&0xfffffc00) | (erpn)) +#define TLB2(a) ((a)&0x00000fbf)
-#define tlbtab_start\ - mflr r1 ;\ - bl 0f ; +#define tlbtab_start \ + mflr r1; \ + bl 0f;
-#define tlbtab_end\ - .long 0, 0, 0 ; \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; +#define tlbtab_end \ + .long 0, 0, 0; \ +0: mflr r0; \ + mtlr r1; \ + blr;
#define tlbentry(epn,sz,rpn,erpn,attr)\ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-/************************************************************************** +/* * TLB TABLE * * This table is used by the cpu boot code to setup the initial tlb * entries. Rather than make broad assumptions in the cpu source tree, * this table lets each board set things up however they like. * - * Pointer to the table is returned in r1 - * - *************************************************************************/ + * Pointer to the table is returned in r1 + */
.section .bootpg,"ax" .globl tlbtab diff --git a/board/xpedite1k/u-boot.lds b/board/xpedite1k/u-boot.lds index c8f9646..fc001b2 100644 --- a/board/xpedite1k/u-boot.lds +++ b/board/xpedite1k/u-boot.lds @@ -78,9 +78,6 @@ SECTIONS lib_ppc/extable.o (.text) lib_generic/zlib.o (.text)
-/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - *(.text) *(.fixup) *(.got1) diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c index 36a133f..dbe0bb6 100644 --- a/board/xpedite1k/xpedite1k.c +++ b/board/xpedite1k/xpedite1k.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2003 Travis B. Sawyer travis.sawyer@sandburst.com + * Copyright (C) 2003 Travis B. Sawyer travis.sawyer@sandburst.com * * See file CREDITS for list of people who contributed to this * project. @@ -11,7 +11,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -20,7 +20,6 @@ * MA 02111-1307 USA */
- #include <common.h> #include <asm/processor.h> #include <spd_sdram.h> @@ -32,7 +31,8 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { unsigned long sdrreg; - /* TBS: Setup the GPIO access for the user LEDs */ + + /* TBS: Setup the GPIO access for the user LEDs */ mfsdr(sdr_pfc0, sdrreg); mtsdr(sdr_pfc0, (sdrreg & ~0x00000100) | 0x00000E00); out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3)); @@ -41,18 +41,15 @@ int board_early_init_f(void) LED2_OFF(); LED3_OFF();
- /*-------------------------------------------------------------------- - * Setup the external bus controller/chip selects - *-------------------------------------------------------------------*/ - mtebc (pb0ap, 0x04055200); /* 16MB Strata FLASH */ - mtebc (pb0cr, 0xff098000); /* BAS=0xff0 16MB R/W 8-bit */ - mtebc (pb1ap, 0x04055200); /* 512KB Socketed AMD FLASH */ - mtebc (pb1cr, 0xfe018000); /* BAS=0xfe0 1MB R/W 8-bit */ + /* Setup the external bus controller/chip selects */ + mtebc(pb0ap, 0x04055200); /* 16MB Strata FLASH */ + mtebc(pb0cr, 0xff098000); /* BAS=0xff0 16MB R/W 8-bit */ + mtebc(pb1ap, 0x04055200); /* 512KB Socketed AMD FLASH */ + mtebc(pb1cr, 0xfe018000); /* BAS=0xfe0 1MB R/W 8-bit */
- /*-------------------------------------------------------------------- - * Setup the interrupt controller polarities, triggers, etc. - *-------------------------------------------------------------------*/ /* + * Setup the interrupt controller polarities, triggers, etc. + * * Because of the interrupt handling rework to handle 440GX interrupts * with the common code, we needed to change names of the UIC registers. * Here the new relationship: @@ -64,78 +61,73 @@ int board_early_init_f(void) * UIC2 UIC1 * UIC3 UIC2 */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ - mtdcr (uic1er, 0x00000000); /* disable all */ - mtdcr (uic1cr, 0x00000003); /* SMI & UIC1 crit are critical */ - mtdcr (uic1pr, 0xfffffe00); /* per ref-board manual */ - mtdcr (uic1tr, 0x01c00000); /* per ref-board manual */ - mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ - - mtdcr (uic2sr, 0xffffffff); /* clear all */ - mtdcr (uic2er, 0x00000000); /* disable all */ - mtdcr (uic2cr, 0x00000000); /* all non-critical */ - mtdcr (uic2pr, 0xffffc0ff); /* per ref-board manual */ - mtdcr (uic2tr, 0x00ff8000); /* per ref-board manual */ - mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic2sr, 0xffffffff); /* clear all */ - - mtdcr (uic3sr, 0xffffffff); /* clear all */ - mtdcr (uic3er, 0x00000000); /* disable all */ - mtdcr (uic3cr, 0x00000000); /* all non-critical */ - mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */ - mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */ - mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic3sr, 0xffffffff); /* clear all */ - - mtdcr (uic0sr, 0xfc000000); /* clear all */ - mtdcr (uic0er, 0x00000000); /* disable all */ - mtdcr (uic0cr, 0x00000000); /* all non-critical */ - mtdcr (uic0pr, 0xfc000000); /* */ - mtdcr (uic0tr, 0x00000000); /* */ - mtdcr (uic0vr, 0x00000001); /* */ + mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(uic1er, 0x00000000); /* disable all */ + mtdcr(uic1cr, 0x00000003); /* SMI & UIC1 crit are critical */ + mtdcr(uic1pr, 0xfffffe00); /* per ref-board manual */ + mtdcr(uic1tr, 0x01c00000); /* per ref-board manual */ + mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(uic1sr, 0xffffffff); /* clear all */ + + mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(uic2er, 0x00000000); /* disable all */ + mtdcr(uic2cr, 0x00000000); /* all non-critical */ + mtdcr(uic2pr, 0xffffc0ff); /* per ref-board manual */ + mtdcr(uic2tr, 0x00ff8000); /* per ref-board manual */ + mtdcr(uic2vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(uic2sr, 0xffffffff); /* clear all */ + + mtdcr(uic3sr, 0xffffffff); /* clear all */ + mtdcr(uic3er, 0x00000000); /* disable all */ + mtdcr(uic3cr, 0x00000000); /* all non-critical */ + mtdcr(uic3pr, 0xffffffff); /* per ref-board manual */ + mtdcr(uic3tr, 0x00ff8c0f); /* per ref-board manual */ + mtdcr(uic3vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(uic3sr, 0xffffffff); /* clear all */ + + mtdcr(uic0sr, 0xfc000000); /* clear all */ + mtdcr(uic0er, 0x00000000); /* disable all */ + mtdcr(uic0cr, 0x00000000); /* all non-critical */ + mtdcr(uic0pr, 0xfc000000); /* */ + mtdcr(uic0tr, 0x00000000); /* */ + mtdcr(uic0vr, 0x00000001); /* */
LED0_ON();
- return 0; }
-int checkboard (void) +int checkboard(void) { - printf ("Board: XES XPedite1000 440GX\n"); + printf("Board: XES XPedite1000 440GX\n");
- return (0); + return 0; }
- -phys_size_t initdram (int board_type) +phys_size_t initdram(int board_type) { return spd_sdram(); }
- -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. +/* + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. * - ************************************************************************/ + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + */ + #if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) +int pci_pre_init(struct pci_controller * hose) { unsigned long strap; + /* See if we're supposed to setup the pci */ mfsdr(sdr_sdstp1, strap); - if ((strap & 0x00010000) == 0) { - return (0); - } + if ((strap & 0x00010000) == 0) + return 0;
#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV) /* Setup System Device Register PCIX0_XCR */ @@ -143,66 +135,55 @@ int pci_pre_init(struct pci_controller * hose ) strap &= 0x0f000000; mtsdr(sdr_xcr, strap); #endif + return 1; } #endif /* defined(CONFIG_PCI) */
-/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ #if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) +/* + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + */ +void pci_target_init(struct pci_controller * hose) { - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0SA, 0 ); /* disable */ - out32r( PCIX0_PIM1SA, 0 ); /* disable */ - out32r( PCIX0_PIM2SA, 0 ); /* disable */ - out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ + /* Disable everything */ + out32r(PCIX0_PIM0SA, 0); + out32r(PCIX0_PIM1SA, 0); + out32r(PCIX0_PIM2SA, 0); + out32r(PCIX0_EROMBA, 0); /* disable expansion rom */ + + /* * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIX0_PIM0LAH, 0 ); - out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + */ + out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); + out32r(PCIX0_PIM0LAH, 0); + out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
- out32r( PCIX0_BAR0, 0 ); + out32r(PCIX0_BAR0, 0);
- /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); + /* Program the board's subsystem id/vendor id */ + out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); + out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
- out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); + out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
- -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. +#if defined(CONFIG_PCI) +/* + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. * - ************************************************************************/ -#if defined(CONFIG_PCI) + * Return 0 for adapter mode, non-zero for host (monarch) mode. + */ int is_pci_host(struct pci_controller *hose) { return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0); @@ -216,11 +197,10 @@ int is_pci_host(struct pci_controller *hose) */ int post_hotkeys_pressed(void) { - - return (ctrlc()); + return ctrlc(); }
-void post_word_store (ulong a) +void post_word_store(ulong a) { volatile ulong *save_addr = (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR); @@ -228,11 +208,11 @@ void post_word_store (ulong a) *save_addr = a; }
-ulong post_word_load (void) +ulong post_word_load(void) { volatile ulong *save_addr = (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
return *save_addr; } -#endif \ No newline at end of file +#endif diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h index 93c4b0a..f141398 100644 --- a/include/configs/XPEDITE1K.h +++ b/include/configs/XPEDITE1K.h @@ -20,51 +20,48 @@ * MA 02111-1307 USA */
-/************************************************************************ +/* * config for XPedite1000 from XES Inc. * Ported from EBONY config by Travis B. Sawyer tsawyer@sandburst.com * (C) Copyright 2003 Sandburst Corporation * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony) - ***********************************************************************/ + */
#ifndef __CONFIG_H #define __CONFIG_H
-/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ +/* High Level Configuration Options */ #define CONFIG_XPEDITE1K 1 /* Board is XPedite 1000 */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 #define CONFIG_440GX 1 /* 440 GX */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
- /* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_RTC | \ +#define CONFIG_POST (CONFIG_SYS_POST_RTC | \ CONFIG_SYS_POST_I2C)
-/*----------------------------------------------------------------------- +/* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */ + */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ -#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ +#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ +#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
-#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) -#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700) +#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) +#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
-#define USR_LED0 0x00000080 -#define USR_LED1 0x00000100 -#define USR_LED2 0x00000200 -#define USR_LED3 0x00000400 +#define USR_LED0 0x00000080 +#define USR_LED1 0x00000100 +#define USR_LED2 0x00000200 +#define USR_LED3 0x00000400
#ifndef __ASSEMBLY__ extern unsigned long in32(unsigned int); @@ -81,50 +78,34 @@ extern void out32(unsigned int, unsigned long); #define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3)) #endif
-/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_TEMP_STACK_OCM 1 -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ - +/* Initial RAM & stack pointer (placed in internal SRAM) */ +#define CONFIG_SYS_TEMP_STACK_OCM 1 +#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ +#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/ +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc */
-/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ +/* Serial Port */ #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_BAUDRATE 9600 +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
-#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400} +/* RTC: STMicro M41T00 */ +#define CONFIG_RTC_M41T11 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_M41T11_BASE_YEAR 2000
-/*----------------------------------------------------------------------- - * NVRAM/RTC - * - * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located. - * The DS1743 code assumes this condition (i.e. -- it assumes the base - * address for the RTC registers is: - * - * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - * - *----------------------------------------------------------------------*/ -/* TBS: Xpedite 1000 has STMicro M41T00 via IIC */ -#define CONFIG_RTC_M41T11 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 2000 - -/*----------------------------------------------------------------------- +/* * FLASH related - *----------------------------------------------------------------------*/ + */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ @@ -133,70 +114,60 @@ extern void out32(unsigned int, unsigned long); #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ -#define SPD_EEPROM_ADDRESS {0x54} /* SPD i2c spd addresses */ -#define CONFIG_VERY_BIG_RAM 1 -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +/* DDR SDRAM */ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS {0x54} /* SPD i2c spd addresses */ +#define CONFIG_VERY_BIG_RAM 1 + +/* I2C */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7f -#define CONFIG_SYS_I2C_NOPROBES {0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,0x5c,0x69} /* Don't probe these addrs */ +#define CONFIG_SYS_I2C_NOPROBES {0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,0x5c,0x69}
-/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_SIZE 0x100 /* Size of Environment vars */ +/* Environment */ +#define CONFIG_ENV_IS_IN_EEPROM 1 +#define CONFIG_ENV_SIZE 0x100 /* Size of Environment vars */ #define CONFIG_ENV_OFFSET 0x100 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* this is actually the second page of the eeprom */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
#define CONFIG_BOOTARGS "root=/dev/hda1 " -#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */ -#define CONFIG_BOOTDELAY 5 /* disable autoboot */ +#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */ +#define CONFIG_BOOTDELAY 5 /* disable autoboot */ #define CONFIG_BAUDRATE 9600
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address phy0 not populated */ #define CONFIG_PHY1_ADDR 1 /* PHY address phy1 not populated */ #define CONFIG_PHY2_ADDR 4 /* PHY address phy2 */ #define CONFIG_PHY3_ADDR 8 /* PHY address phy3 */ #define CONFIG_NET_MULTI 1 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ - -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ -#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */ -#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */ +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */ +#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */
-/* - * BOOTP options - */ +/* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME
- /* - * Command line configuration. + * Command line configuration */ #include <config_cmd_default.h>
@@ -212,48 +183,45 @@ extern void out32(unsigned int, unsigned long); #define CONFIG_CMD_DIAG #define CONFIG_CMD_FAT
- -#undef CONFIG_WATCHDOG /* watchdog disabled */ +#undef CONFIG_WATCHDOG /* watchdog disabled */
/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
- -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- +/* + * PCI */ /* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */ - +#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ -#define CONFIG_SYS_PCI_FORCE_PCI_CONV /* Force PCI Conventional Mode */ +#define CONFIG_SYS_PCI_FORCE_PCI_CONV /* Force PCI Conventional Mode */ + /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is @@ -263,11 +231,9 @@ extern void out32(unsigned int, unsigned long);
/* * Internal Definitions - * - * Boot Flags */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */
#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */