[U-Boot] [PATCH v1 8/9] arm: dts: imx7: sync with Linux

20 Apr 2018

From: Stefan Agner stefan.agner@toradex.com
Sync with Linux commit 60cc43fc8884 ("Linux 4.17-rc1").
Signed-off-by: Stefan Agner stefan.agner@toradex.com
---
arch/arm/dts/imx7s.dtsi                 | 491 +++++++++++++++---------
 include/dt-bindings/clock/imx7d-clock.h |  15 +-
 include/dt-bindings/power/imx7-power.h  |  16 +
 3 files changed, 341 insertions(+), 181 deletions(-)
 create mode 100644 include/dt-bindings/power/imx7-power.h

diff --git a/arch/arm/dts/imx7s.dtsi b/arch/arm/dts/imx7s.dtsi
index a7d48e785d..4d42335c0d 100644
--- a/arch/arm/dts/imx7s.dtsi
+++ b/arch/arm/dts/imx7s.dtsi
@@ -42,6 +42,7 @@
  */
#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/power/imx7-power.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -57,7 +58,7 @@
     * Also for U-Boot there must be a pre-existing /memory node.
     */
    chosen {};
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; };
aliases {
    	gpio0 = &gpio1;
@@ -115,11 +116,77 @@
    	clock-output-names = "osc";
    };
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY1_CLK>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	usbphynop3: usbphynop3 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&gpc>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	replicator {
+		/*
+		 * non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell"
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+				/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etf_out_port>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
    soc {
    	#address-cells = <1>;
    	#size-cells = <1>;
    	compatible = "simple-bus";
-		interrupt-parent = <&intc>;
+		interrupt-parent = <&gpc>;
    	ranges;
funnel@30041000 {
@@ -259,62 +326,18 @@
    		};
    	};
-		replicator {
-			/*
-			 * non-configurable replicators don't show up on the
-			 * AMBA bus.  As such no need to add "arm,primecell"
-			 */
-			compatible = "arm,coresight-replicator";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/* replicator output ports */
-				port@0 {
-					reg = <0>;
-					replicator_out_port0: endpoint {
-						remote-endpoint = <&tpiu_in_port>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					replicator_out_port1: endpoint {
-						remote-endpoint = <&etr_in_port>;
-					};
-				};
-
-				/* replicator input port */
-				port@2 {
-					reg = <0>;
-					replicator_in_port0: endpoint {
-						slave-mode;
-						remote-endpoint = <&etf_out_port>;
-					};
-				};
-			};
-		};
-
    	intc: interrupt-controller@31001000 {
    		compatible = "arm,cortex-a7-gic";
    		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
    		#interrupt-cells = <3>;
    		interrupt-controller;
+			interrupt-parent = <&intc>;
    		reg = <0x31001000 0x1000>,
    		      <0x31002000 0x2000>,
    		      <0x31004000 0x2000>,
    		      <0x31006000 0x2000>;
    	};
-		timer {
-			compatible = "arm,armv7-timer";
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		};
-
    	aips1: aips-bus@30000000 {
    		compatible = "fsl,aips-bus", "simple-bus";
    		#address-cells = <1>;
@@ -482,20 +505,49 @@
    			status = "disabled";
    		};
+			kpp: kpp@30320000 {
+				compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
+				reg = <0x30320000 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_KPP_ROOT_CLK>;
+				status = "disabled";
+			};
+
    		iomuxc: iomuxc@30330000 {
    			compatible = "fsl,imx7d-iomuxc";
    			reg = <0x30330000 0x10000>;
    		};
gpr: iomuxc-gpr@30340000 {
-				compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
+				compatible = "fsl,imx7d-iomuxc-gpr",
+					"fsl,imx6q-iomuxc-gpr", "syscon";
    			reg = <0x30340000 0x10000>;
    		};
ocotp: ocotp-ctrl@30350000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
    			compatible = "fsl,imx7d-ocotp", "syscon";
    			reg = <0x30350000 0x10000>;
    			clocks = <&clks IMX7D_OCOTP_CLK>;
+
+				tempmon_calib: calib@3c {
+					reg = <0x3c 0x4>;
+				};
+
+				tempmon_temp_grade: temp-grade@10 {
+					reg = <0x10 0x4>;
+				};
+			};
+
+			tempmon: tempmon {
+				compatible = "fsl,imx7d-tempmon";
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,tempmon =<&anatop>;
+				nvmem-cells = <&tempmon_calib>,
+					<&tempmon_temp_grade>;
+				nvmem-cell-names = "calib", "temp_grade";
+				clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
    		};
anatop: anatop@30360000 {
@@ -504,8 +556,11 @@
    			reg = <0x30360000 0x10000>;
    			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
    				<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
-				reg_1p0d: regulator-vdd1p0d {
+				reg_1p0d: regulator-vdd1p0d@30360210 {
+					reg = <0x30360210>;
    				compatible = "fsl,anatop-regulator";
    				regulator-name = "vdd1p0d";
    				regulator-min-microvolt = <800000>;
@@ -516,6 +571,7 @@
    				anatop-min-bit-val = <8>;
    				anatop-min-voltage = <800000>;
    				anatop-max-voltage = <1200000>;
+					anatop-enable-bit = <0>;
    			};
    		};
@@ -529,12 +585,15 @@
    				offset = <0x34>;
    				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
    					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SNVS_CLK>;
+					clock-names = "snvs-rtc";
    			};
snvs_poweroff: snvs-poweroff {
    				compatible = "syscon-poweroff";
    				regmap = <&snvs>;
    				offset = <0x38>;
+					value = <0x60>;
    				mask = <0x60>;
    			};
@@ -558,11 +617,32 @@
    		};
src: src@30390000 {
-				compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
+				compatible = "fsl,imx7d-src", "syscon";
    			reg = <0x30390000 0x10000>;
    			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
    			#reset-cells = <1>;
    		};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx7d-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupt-controller;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <3>;
+				interrupt-parent = <&intc>;
+				#power-domain-cells = <1>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_pcie_phy: pgc-power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <1>;
+						power-supply = <&reg_1p0d>;
+					};
+				};
+			};
    	};
aips2: aips-bus@30400000 {
@@ -609,7 +689,7 @@
    			clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
    				 <&clks IMX7D_PWM1_ROOT_CLK>;
    			clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
    			status = "disabled";
    		};
@@ -620,7 +700,7 @@
    			clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
    				 <&clks IMX7D_PWM2_ROOT_CLK>;
    			clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
    			status = "disabled";
    		};
@@ -631,7 +711,7 @@
    			clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
    				 <&clks IMX7D_PWM3_ROOT_CLK>;
    			clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
    			status = "disabled";
    		};
@@ -642,7 +722,7 @@
    			clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
    				 <&clks IMX7D_PWM4_ROOT_CLK>;
    			clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
    			status = "disabled";
    		};
@@ -664,118 +744,156 @@
    		reg = <0x30800000 0x400000>;
    		ranges;
-			ecspi1: ecspi@30820000 {
+			spba-bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
    			#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30820000 0x10000>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
-					<&clks IMX7D_ECSPI1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
+				#size-cells = <1>;
+				reg = <0x30800000 0x100000>;
+				ranges;
+
+				ecspi1: ecspi@30820000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
+						<&clks IMX7D_ECSPI1_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
-			ecspi2: ecspi@30830000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30830000 0x10000>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
-					<&clks IMX7D_ECSPI2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
+				ecspi2: ecspi@30830000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
+						<&clks IMX7D_ECSPI2_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
-			ecspi3: ecspi@30840000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30840000 0x10000>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
-					<&clks IMX7D_ECSPI3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
+				ecspi3: ecspi@30840000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
+						<&clks IMX7D_ECSPI3_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
-			uart1: serial@30860000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30860000 0x10000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART1_ROOT_CLK>,
-					<&clks IMX7D_UART1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
+				uart1: serial@30860000 {
+					compatible = "fsl,imx7d-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+						<&clks IMX7D_UART1_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
-			uart2: serial@30890000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30890000 0x10000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
-					<&clks IMX7D_UART2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
+				uart2: serial@30890000 {
+					compatible = "fsl,imx7d-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+						<&clks IMX7D_UART2_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
-			uart3: serial@30880000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30880000 0x10000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART3_ROOT_CLK>,
-					<&clks IMX7D_UART3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
+				uart3: serial@30880000 {
+					compatible = "fsl,imx7d-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+						<&clks IMX7D_UART3_ROOT_CLK>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
-			sai1: sai@308a0000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
-				reg = <0x308a0000 0x10000>;
-				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_SAI1_IPG_CLK>,
-					 <&clks IMX7D_SAI1_ROOT_CLK>,
-					 <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_CLK_DUMMY>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "rx", "tx";
-				dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
-				status = "disabled";
-			};
+				sai1: sai@308a0000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+					reg = <0x308a0000 0x10000>;
+					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SAI1_IPG_CLK>,
+						 <&clks IMX7D_SAI1_ROOT_CLK>,
+						 <&clks IMX7D_CLK_DUMMY>,
+						 <&clks IMX7D_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
+					status = "disabled";
+				};
-			sai2: sai@308b0000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
-				reg = <0x308b0000 0x10000>;
-				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_SAI2_IPG_CLK>,
-					 <&clks IMX7D_SAI2_ROOT_CLK>,
-					 <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_CLK_DUMMY>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "rx", "tx";
-				dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
-				status = "disabled";
+				sai2: sai@308b0000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+					reg = <0x308b0000 0x10000>;
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SAI2_IPG_CLK>,
+						 <&clks IMX7D_SAI2_ROOT_CLK>,
+						 <&clks IMX7D_CLK_DUMMY>,
+						 <&clks IMX7D_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
+					status = "disabled";
+				};
+
+				sai3: sai@308c0000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+					reg = <0x308c0000 0x10000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX7D_SAI3_IPG_CLK>,
+						 <&clks IMX7D_SAI3_ROOT_CLK>,
+						 <&clks IMX7D_CLK_DUMMY>,
+						 <&clks IMX7D_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dma-names = "rx", "tx";
+					dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
+					status = "disabled";
+				};
    		};
-			sai3: sai@308c0000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
-				reg = <0x308c0000 0x10000>;
-				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_SAI3_IPG_CLK>,
-					 <&clks IMX7D_SAI3_ROOT_CLK>,
-					 <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_CLK_DUMMY>;
-				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "rx", "tx";
-				dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
-				status = "disabled";
+			crypto: caam@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CAAM_CLK>,
+					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+				clock-names = "ipg", "aclk";
+
+				sec_jr0: jr0@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr1@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
    		};
flexcan1: can@30a00000 {
@@ -918,24 +1036,12 @@
    			reg = <0x30b30200 0x200>;
    		};
-			usbphynop1: usbphynop1 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_PHY1_CLK>;
-				clock-names = "main_clk";
-			};
-
-			usbphynop3: usbphynop3 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
-				clock-names = "main_clk";
-			};
-
    		usdhc1: usdhc@30b40000 {
    			compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
    			reg = <0x30b40000 0x10000>;
    			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
    				<&clks IMX7D_USDHC1_ROOT_CLK>;
    			clock-names = "ipg", "ahb", "per";
    			bus-width = <4>;
@@ -946,8 +1052,8 @@
    			compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
    			reg = <0x30b50000 0x10000>;
    			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
    				<&clks IMX7D_USDHC2_ROOT_CLK>;
    			clock-names = "ipg", "ahb", "per";
    			bus-width = <4>;
@@ -958,8 +1064,8 @@
    			compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
    			reg = <0x30b60000 0x10000>;
    			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+					<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
    				<&clks IMX7D_USDHC3_ROOT_CLK>;
    			clock-names = "ipg", "ahb", "per";
    			bus-width = <4>;
@@ -980,9 +1086,11 @@
    		fec1: ethernet@30be0000 {
    			compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
    			reg = <0x30be0000 0x10000>;
-				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				interrupt-names = "int0", "int1", "int2", "pps";
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
    				<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+					<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
    			clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
    				<&clks IMX7D_ENET_AXI_ROOT_CLK>,
    				<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
@@ -995,5 +1103,36 @@
    			status = "disabled";
    		};
    	};
+
+		dma_apbh: dma-apbh@33000000 {
+			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x33000000 0x2000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
+		};
+
+		gpmi: gpmi-nand@33002000{
+			compatible = "fsl,imx7d-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
+				<&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
+			clock-names = "gpmi_io", "gpmi_bch_apb";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+			assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
+			assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
+		};
    };
 };
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index a7a1a50f33..b2325d3e23 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -80,10 +80,10 @@
 #define IMX7D_ARM_M4_ROOT_SRC		67
 #define IMX7D_ARM_M4_ROOT_CG		68
 #define IMX7D_ARM_M4_ROOT_DIV		69
-#define IMX7D_ARM_M0_ROOT_CLK		70
-#define IMX7D_ARM_M0_ROOT_SRC		71
-#define IMX7D_ARM_M0_ROOT_CG		72
-#define IMX7D_ARM_M0_ROOT_DIV		73
+#define IMX7D_ARM_M0_ROOT_CLK		70	/* unused */
+#define IMX7D_ARM_M0_ROOT_SRC		71	/* unused */
+#define IMX7D_ARM_M0_ROOT_CG		72	/* unused */
+#define IMX7D_ARM_M0_ROOT_DIV		73	/* unused */
 #define IMX7D_MAIN_AXI_ROOT_CLK		74
 #define IMX7D_MAIN_AXI_ROOT_SRC		75
 #define IMX7D_MAIN_AXI_ROOT_CG		76
@@ -450,5 +450,10 @@
 #define IMX7D_CLK_ARM			437
 #define IMX7D_CKIL			438
 #define IMX7D_OCOTP_CLK			439
-#define IMX7D_CLK_END			440
+#define IMX7D_NAND_RAWNAND_CLK		440
+#define IMX7D_NAND_USDHC_BUS_RAWNAND_CLK 441
+#define IMX7D_SNVS_CLK			442
+#define IMX7D_CAAM_CLK			443
+#define IMX7D_KPP_ROOT_CLK		444
+#define IMX7D_CLK_END			445
 #endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
diff --git a/include/dt-bindings/power/imx7-power.h b/include/dt-bindings/power/imx7-power.h
new file mode 100644
index 0000000000..3a181e4105
--- /dev/null
+++ b/include/dt-bindings/power/imx7-power.h
@@ -0,0 +1,16 @@
+/*
+ *  Copyright (C) 2017 Impinj
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DT_BINDINGS_IMX7_POWER_H__
+#define __DT_BINDINGS_IMX7_POWER_H__
+
+#define IMX7_POWER_DOMAIN_MIPI_PHY		0
+#define IMX7_POWER_DOMAIN_PCIE_PHY		1
+#define IMX7_POWER_DOMAIN_USB_HSIC_PHY		2
+
+#endif
-- 
2.17.0


    