Re: [RESEND PATCH 1/1] clk: ti: k3-pll: Add calibration support for non fractional mode

Hi Vishal!

+Tom

On October 23, 2023 thus sayeth Vishal Mahaveer:

PLL calibration needs to be enabled when operating in non fractional mode. Add the sequence to do a fast calibration when using PLL in this mode.

Signed-off-by: Vishal Mahaveer vishalm@ti.com

Reviewed-by: Bryan Brattlof bb@ti.com

---

drivers/clk/ti/clk-k3-pll.c | 81 ++++++++++++++++++++++++++++++++++--- 1 file changed, 75 insertions(+), 6 deletions(-)

Thanks for fixing this! I've tested the am62x and the j721e and this appears to properly setup the PLLs without firmware's help after :)

~Bryan