On Fri, May 4, 2018 at 5:49 AM, Ley Foon Tan ley.foon.tan@intel.com wrote:
Add reset ctrl to dwmmc socfpga, designware Ethernet and ns16550 serial drivers.
A reset property is an optional feature, so only print out a warning and do not fail if a reset property is not present.
If a reset property is discovered, then use it to deassert, thus bringing the IP out of reset.
This is preparation to upstream Intel Stratix 10 SoC support in [1].
v2 change:
- remove 'return' in designware emac driver
- keep reset control in socfpga_dw_mmc.c because it didn't call to common dwmmc probe function when in SPL.
- add reviewed-by in ns16550 patch
History: v1: https://patchwork.ozlabs.org/cover/905519/
Ley Foon Tan (3): mmc: dwmmc: socfpga: Add reset ctrl to driver serial: ns16550: Add reset ctrl to driver net: designware: Add reset ctrl to driver
drivers/mmc/socfpga_dw_mmc.c | 19 +++++++++++++++++++ drivers/net/designware.c | 11 +++++++++++ drivers/serial/ns16550.c | 12 ++++++++++++ 3 files changed, 42 insertions(+), 0 deletions(-)
Please run get_maintainer.pl on V3. You're forgetting to include the maintainers on these subsystems.
Dinh