On 08/20/2013 02:48 AM, Scott Wood wrote:
On Mon, 2013-08-19 at 17:50 +0200, Valentin Longchamp wrote:
On 08/13/2013 11:38 PM, Scott Wood wrote:
On Fri, 2013-07-26 at 12:02 +0200, Valentin Longchamp wrote:
This patch introduces the support for Keymile's kmp204x reference design. This design is based on Freescale's P2040/P2041 SoC.
The peripherals used by this design are:
- DDR3 RAM with SPD support
- SPI NOR Flash as boot medium
- NAND Flash
- 2 PCIe busses (hosts 1 and 3)
- 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5)
- 3 Local Bus windows, with one dedicated to the QRIO reset/power mgmt FPGA
- 2 HW I2C busses
- last but not least, the mandatory serial port
The board/keymile/kmp204x code is mostly based on Freescale's P2041rdb support and was changed according to our design (that means essentially removing what is not present on the designs and a few adaptations).
A lot of the copied files have had Freescale copyrights removed... Also please try to factor shared code out rather than duplicate, where practical.
Well, I had tried to come a first proposal that factored shared code but I was advised to copy the code: [1]. For the copyrights I will fix it.
[1]
Did you mean to cite something here?
Oops, yes sorry: http://u-boot.10912.n7.nabble.com/RFC-PATCH-mpc85xx-move-generic-corenet-to-...