-----Original Message----- From: Vladimir Zapolskiy [mailto:vz@mleia.com] Sent: 14-Aug-15 11:58 AM To: slemieux.tyco@gmail.com; u-boot@lists.denx.de Cc: scottwood@freescale.com; marex@denx.de; albert.u.boot@aribaud.net; LEMIEUX, SYLVAIN; Tom Rini Subject: Re: [PATCH v7 2/5] nand: lpc32xx: add hardware ECC support
Hi Sylvain,
On 13.08.2015 22:40, slemieux.tyco@gmail.com wrote:
From: Sylvain Lemieux slemieux@tycoint.com
Incorporate NAND SLC hardware ECC support from legacy LPCLinux NXP BSP. The code taken from the legacy patch is:
- lpc32xx SLC NAND driver (hardware ECC support)
- lpc3250 header file missing SLC NAND registers definition
The legacy driver was updated and clean-up as part of the integration with the existing NAND SLC driver.
Signed-off-by: Sylvain Lemieux slemieux@tycoint.com
Looks good, tested on non-SPL build (SPL build produces a programmed #warning and the following compilation error due to missing DMA driver in SPL)
CONFIG_SPL_DMA_SUPPORT need to be define in "devkit3250.h" when enabling the DMA for an SPL build.
The warning will be display, as the DMA support in SPL image is not tested.
Tested-by: Vladimir Zapolskiy vz@mleia.com
With best wishes, Vladimir
________________________________
This e-mail contains privileged and confidential information intended for the use of the addressees named above. If you are not the intended recipient of this e-mail, you are hereby notified that you must not disseminate, copy or take any action in respect of any information contained in it. If you have received this e-mail in error, please notify the sender immediately by e-mail and immediately destroy this e-mail and its attachments.