The QorIQ LS1088A processor is built on the Layerscape architecture combining eight ARM A53 processor cores with advanced, high-performance datapath acceleration and networks, peripheral interfaces required for networking, wireless infrastructure, and general-purpose embedded applications.
LS1088A is compliant with the Layerscape Chassis Generation 3.
Features summary: - Eight 32-bit / 64-bit ARM v8 Cortex-A53 CPUs - Cores are in 2 cluster of 4-cores each - Cache coherent interconnect (CCI-400) - One 64-bit DDR4 SDRAM memory controller with ECC - Data path acceleration architecture 2.0 (DPAA2) - Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs - QSPI, IFC, 3 PCIe, 1 SATA, 2 USB, 1 SDXC, 2 DUARTs etc
Signed-off-by: Alison Wang alison.wang@nxp.com Signed-off-by: Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Signed-off-by: Ashish Kumar Ashish.Kumar@nxp.com Signed-off-by: Raghav Dogra raghav.dogra@nxp.com Signed-off-by: Shaohui Xie Shaohui.Xie@nxp.com ---
v5: No change
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 35 +++++- arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 + arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc | 43 ++++++- .../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 19 ++++ arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c | 126 +++++++++++++++++++++ arch/arm/cpu/armv8/fsl-layerscape/soc.c | 1 + arch/arm/dts/fsl-ls1088a.dtsi | 78 +++++++++++++ arch/arm/include/asm/arch-fsl-layerscape/config.h | 62 +++++++++- arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 4 + .../include/asm/arch-fsl-layerscape/fsl_serdes.h | 3 +- .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 11 ++ arch/arm/include/asm/arch-fsl-layerscape/soc.h | 4 + .../asm/arch-fsl-layerscape/stream_id_lsch3.h | 14 +++ drivers/ddr/fsl/util.c | 2 +- drivers/net/ldpaa_eth/Makefile | 1 + drivers/net/ldpaa_eth/ls1088a.c | 87 ++++++++++++++ 16 files changed, 482 insertions(+), 12 deletions(-) create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c create mode 100644 arch/arm/dts/fsl-ls1088a.dtsi create mode 100644 drivers/net/ldpaa_eth/ls1088a.c
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index eb8ccd1..aa2d0d1 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -50,6 +50,29 @@ config ARCH_LS1046A select BOARD_EARLY_INIT_F imply SCSI
+config ARCH_LS1088A + bool + select ARMV8_SET_SMPEN + select FSL_LSCH3 + select SYS_FSL_DDR + select SYS_FSL_DDR_LE + select SYS_FSL_DDR_VER_50 + select SYS_FSL_ERRATUM_A009803 + select SYS_FSL_ERRATUM_A009942 + select SYS_FSL_ERRATUM_A010165 + select SYS_FSL_ERRATUM_A008511 + select SYS_FSL_ERRATUM_A008850 + select SYS_FSL_HAS_CCI400 + select SYS_FSL_HAS_DDR4 + select SYS_FSL_HAS_SEC + select SYS_FSL_SEC_COMPAT_5 + select SYS_FSL_SEC_LE + select SYS_FSL_SRDS_1 + select SYS_FSL_SRDS_2 + select FSL_TZASC_1 + select ARCH_EARLY_INIT_R + select BOARD_EARLY_INIT_F + config ARCH_LS2080A bool select ARMV8_SET_SMPEN @@ -100,7 +123,7 @@ config FSL_LSCH3
config FSL_MC_ENET bool "Management Complex network" - depends on ARCH_LS2080A + depends on ARCH_LS2080A || ARCH_LS1088A default y select RESV_RAM help @@ -116,6 +139,7 @@ config FSL_PCIE_COMPAT default "fsl,ls1043a-pcie" if ARCH_LS1043A default "fsl,ls1046a-pcie" if ARCH_LS1046A default "fsl,ls2080a-pcie" if ARCH_LS2080A + default "fsl,ls1088a-pcie" if ARCH_LS1088A help This compatible is used to find pci controller node in Kernel DT to complete fixup. @@ -230,6 +254,7 @@ config MAX_CPUS default 4 if ARCH_LS1043A default 4 if ARCH_LS1046A default 16 if ARCH_LS2080A + default 8 if ARCH_LS1088A default 1 help Set this number to the maximum number of possible CPUs in the SoC. @@ -261,10 +286,10 @@ config SYS_CCI400_OFFSET
config SYS_FSL_IFC_BANK_COUNT int "Maximum banks of Integrated flash controller" - depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A + depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A default 4 if ARCH_LS1043A default 4 if ARCH_LS1046A - default 8 if ARCH_LS2080A + default 8 if ARCH_LS2080A || ARCH_LS1088A
config SYS_FSL_HAS_CCI400 bool @@ -313,6 +338,7 @@ config SYS_FSL_PCLK_DIV int "Platform clock divider" default 1 if ARCH_LS1043A default 1 if ARCH_LS1046A + default 1 if ARCH_LS1088A default 2 help This is the divider that is used to derive Platform clock from @@ -406,7 +432,8 @@ config SYS_FSL_ERRATUM_A009929 config SYS_MC_RSV_MEM_ALIGN hex "Management Complex reserved memory alignment" depends on RESV_RAM - default 0x20000000 + default 0x20000000 if ARCH_LS2080A + default 0x70000000 if ARCH_LS1088A help Reserved memory needs to be aligned for MC to use. Default value is 512MB. diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index e3ce018..115c3fc 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -38,3 +38,7 @@ endif ifneq ($(CONFIG_ARCH_LS1046A),) obj-$(CONFIG_SYS_HAS_SERDES) += ls1046a_serdes.o endif + +ifneq ($(CONFIG_ARCH_LS1088A),) +obj-$(CONFIG_SYS_HAS_SERDES) += ls1088a_serdes.o +endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc index 3ae16ae..276ab90 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc @@ -1,11 +1,12 @@ SoC overview
1. LS1043A - 2. LS2080A - 3. LS1012A - 4. LS1046A - 5. LS2088A - 6. LS2081A + 2. LS1088A + 3. LS2080A + 4. LS1012A + 5. LS1046A + 6. LS2088A + 7. LS2081A
LS1043A --------- @@ -45,6 +46,38 @@ The LS1043A SoC includes the following function and features: - Integrated flash controller supporting NAND and NOR flash - QorIQ platform's trust architecture 2.1
+LS1088A +-------- +The QorIQ LS1088A processor is built on the Layerscape +architecture combining eight ARM A53 processor cores +with advanced, high-performance datapath acceleration +and networks, peripheral interfaces required for +networking, wireless infrastructure, and general-purpose +embedded applications. + +LS1088A is compliant with the Layerscape Chassis Generation 3. + +Features summary: + - 8 32-bit / 64-bit ARM v8 Cortex-A53 CPUs + - Cores are in 2 cluster of 4-cores each + - 1MB L2 - Cache per cluster + - Cache coherent interconnect (CCI-400) + - 1 64-bit DDR4 SDRAM memory controller with ECC + - Data path acceleration architecture 2.0 (DPAA2) + - 4-Lane 10GHz SerDes comprising of WRIOP + - 4-Lane 10GHz SerDes comprising of PCI, SATA, uQE(TDM/HLDC/UART) + - Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs + - QSPI, SPI, IFC2.0 supporting NAND, NOR flash + - 3 PCIe3.0 , 1 SATA3.0, 2 USB3.0, 1 SDXC, 2 DUARTs etc + - 2 DUARTs + - 4 I2C, GPIO + - Thermal monitor unit(TMU) + - 4 Flextimers and 1 generic timer + - Support for hardware virtualization and partitioning enforcement + - QorIQ platform's trust architecture 3.0 + - Service processor (SP) provides pre-boot initialization and secure-boot + capabilities + LS2080A -------- The LS2080A integrated multicore processor combines eight ARM Cortex-A57 diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c index ef97556..179cac6 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c @@ -28,6 +28,20 @@ __weak void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl) return; }
+/* + *The return value of this func is the serdes protocol used. + *Typically this function is called number of times depending + *upon the number of serdes blocks in the Silicon. + *Zero is used to denote that no serdes was enabled, + *this is the case when golden RCW was used where DPAA2 bring was + *intentionally removed to achieve boot to prompt +*/ + +__weak int serdes_get_number(int serdes, int cfg) +{ + return cfg; +} + int is_serdes_configured(enum srds_prtcl device) { int ret = 0; @@ -73,6 +87,9 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device) printf("invalid SerDes%d\n", sd); break; } + + cfg = serdes_get_number(sd, cfg); + /* Is serdes enabled at all? */ if (cfg == 0) return -ENODEV; @@ -99,6 +116,8 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
cfg = gur_in32(&gur->rcwsr[rcwsr - 1]) & sd_prctl_mask; cfg >>= sd_prctl_shift; + + cfg = serdes_get_number(sd, cfg); printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
if (!is_serdes_prtcl_valid(sd, cfg)) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c new file mode 100644 index 0000000..9f5cdd5 --- /dev/null +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c @@ -0,0 +1,126 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/fsl_serdes.h> + +struct serdes_config { + u8 ip_protocol; + u8 lanes[SRDS_MAX_LANES]; + u8 rcw_lanes[SRDS_MAX_LANES]; +}; + +static struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {0x12, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 3, 3 } }, + {0x15, {SGMII3, SGMII7, XFI1, XFI2 }, {3, 3, 1, 1 } }, + {0x16, {SGMII3, SGMII7, SGMII1, XFI2 }, {3, 3, 3, 1 } }, + {0x17, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 3, 2 } }, + {0x18, {SGMII3, SGMII7, SGMII1, SGMII2 }, {3, 3, 2, 2 } }, + {0x19, {SGMII3, QSGMII_B, XFI1, XFI2}, {3, 4, 1, 1 } }, + {0x1A, {SGMII3, QSGMII_B, SGMII1, XFI2 }, {3, 4, 3, 1 } }, + {0x1B, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 3, 2 } }, + {0x1C, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 2, 2 } }, + {0x1D, {QSGMII_A, QSGMII_B, XFI1, XFI2 }, {4, 4, 1, 1 } }, + {0x1E, {QSGMII_A, QSGMII_B, SGMII1, XFI2 }, {4, 4, 3, 1 } }, + {0x1F, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 3, 2 } }, + {0x20, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 2, 2 } }, + {0x35, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 3, 3 } }, + {0x36, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 3, 3 } }, + {0x3A, {SGMII3, PCIE1, SGMII1, SGMII2 }, {3, 5, 3, 3 } }, + {} +}; +static struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {0x0C, {PCIE1, PCIE1, PCIE1, PCIE1 }, {8, 8, 8, 8 } }, + {0x0D, {PCIE1, PCIE2, PCIE3, SATA1 }, {5, 5, 5, 9 } }, + {0x0E, {PCIE1, PCIE1, PCIE2, SATA1 }, {7, 7, 6, 9 } }, + {0x13, {PCIE1, PCIE1, PCIE3, PCIE3 }, {7, 7, 7, 7 } }, + {0x14, {PCIE1, PCIE2, PCIE3, PCIE3 }, {5, 5, 7, 7 } }, + {0x3C, {NONE, PCIE2, NONE, PCIE3 }, {0, 5, 0, 6 } }, + {} +}; + +static struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, + serdes2_cfg_tbl, +}; + +int serdes_get_number(int serdes, int cfg) +{ + struct serdes_config *ptr; + int i, j, index, lnk; + int is_found, max_lane = SRDS_MAX_LANES; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + + while (ptr->ip_protocol) { + is_found = 1; + for (i = 0, j = max_lane - 1; i < max_lane; i++, j--) { + lnk = cfg & (0xf << 4 * i); + lnk = lnk >> (4 * i); + + index = (serdes == FSL_SRDS_1) ? j : i; + + if (ptr->rcw_lanes[index] == lnk && is_found) + is_found = 1; + else + is_found = 0; + } + + if (is_found) + return ptr->ip_protocol; + ptr++; + } + + return 0; +} + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->ip_protocol) { + if (ptr->ip_protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->ip_protocol) { + if (ptr->ip_protocol == prtcl) + break; + ptr++; + } + + if (!ptr->ip_protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index e13f183..83e2871 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -24,6 +24,7 @@ #ifdef CONFIG_CHAIN_OF_TRUST #include <fsl_validate.h> #endif +#include <fsl_immap.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi new file mode 100644 index 0000000..421d2de --- /dev/null +++ b/arch/arm/dts/fsl-ls1088a.dtsi @@ -0,0 +1,78 @@ +/* + * NXP ls1088a SOC common device tree source + * + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/ { + compatible = "fsl,ls1088a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + /* DRAM space - 1, size : 2 GB DRAM */ + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <1 9 0x4>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ + <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ + <1 11 0x8>, /* Virtual PPI, active-low */ + <1 10 0x8>; /* Hypervisor PPI, active-low */ + }; + + serial0: serial@21c0500 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + serial1: serial@21c0600 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + }; + + dspi: dspi@2100000 { + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <0 26 0x4>; /* Level high type */ + num-cs = <6>; + }; + + qspi: quadspi@1550000 { + compatible = "fsl,vf610-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + num-cs = <4>; + }; +}; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index 79e94f9..a7098be 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -116,6 +116,67 @@ #define CONFIG_SYS_FSL_ERRATUM_A008751
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 + +#elif defined(CONFIG_ARCH_LS1088A) +#define CONFIG_SYS_FSL_NUM_CC_PLLS 3 +#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1 } +#define CONFIG_GICV3 +#define CONFIG_FSL_TZPC_BP147 +#define CONFIG_FSL_TZASC_400 +#define CONFIG_SYS_PAGE_SIZE 0x10000 + +#define SRDS_MAX_LANES 4 + +/* TZ Protection Controller Definitions */ +#define TZPC_BASE 0x02200000 +#define TZPCR0SIZE_BASE (TZPC_BASE) +#define TZPCDECPROT_0_STAT_BASE (TZPC_BASE + 0x800) +#define TZPCDECPROT_0_SET_BASE (TZPC_BASE + 0x804) +#define TZPCDECPROT_0_CLR_BASE (TZPC_BASE + 0x808) +#define TZPCDECPROT_1_STAT_BASE (TZPC_BASE + 0x80C) +#define TZPCDECPROT_1_SET_BASE (TZPC_BASE + 0x810) +#define TZPCDECPROT_1_CLR_BASE (TZPC_BASE + 0x814) +#define TZPCDECPROT_2_STAT_BASE (TZPC_BASE + 0x818) +#define TZPCDECPROT_2_SET_BASE (TZPC_BASE + 0x81C) +#define TZPCDECPROT_2_CLR_BASE (TZPC_BASE + 0x820) + +/* Generic Interrupt Controller Definitions */ +#define GICD_BASE 0x06000000 +#define GICR_BASE 0x06100000 + +/* SMMU Defintions */ +#define SMMU_BASE 0x05000000 /* GR0 Base */ + +/* DDR */ +#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) +#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE + +#define CONFIG_SYS_FSL_CCSR_GUR_LE +#define CONFIG_SYS_FSL_CCSR_SCFG_LE +#define CONFIG_SYS_FSL_ESDHC_LE +#define CONFIG_SYS_FSL_IFC_LE +#define CONFIG_SYS_FSL_PEX_LUT_LE + +#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN + +/* SFP */ +#define CONFIG_SYS_FSL_SFP_VER_3_4 +#define CONFIG_SYS_FSL_SFP_LE +#define CONFIG_SYS_FSL_SRK_LE + +/* Security Monitor */ +#define CONFIG_SYS_FSL_SEC_MON_LE + +/* Secure Boot */ +#define CONFIG_ESBC_HDR_LS + +/* DCFG - GUR */ +#define CONFIG_SYS_FSL_CCSR_GUR_LE +#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 +#define CONFIG_SYS_FSL_OCRAM_BASE 0x18000000 /* initial RAM */ +#define SYS_FSL_OCRAM_SPACE_SIZE 0x00200000 /* 2M space */ +#define CONFIG_SYS_FSL_OCRAM_SIZE 0x00020000 /* Real size 128K */ + #elif defined(CONFIG_FSL_LSCH2) #define CONFIG_SYS_FSL_OCRAM_BASE 0x10000000 /* initial RAM */ #define SYS_FSL_OCRAM_SPACE_SIZE 0x00200000 /* 2M space */ @@ -218,7 +279,6 @@ #define GICC_BASE 0x01420000
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 - #else #error SoC not defined #endif diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index c4e5ecc..0126783 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -24,6 +24,10 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(LS1026A, LS1026A, 2), CPU_TYPE_ENTRY(LS2040A, LS2040A, 4), CPU_TYPE_ENTRY(LS1012A, LS1012A, 1), + CPU_TYPE_ENTRY(LS1088A, LS1088A, 8), + CPU_TYPE_ENTRY(LS1084A, LS1084A, 8), + CPU_TYPE_ENTRY(LS1048A, LS1048A, 4), + CPU_TYPE_ENTRY(LS1044A, LS1044A, 4), };
#ifndef CONFIG_SYS_DCACHE_OFF diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h index a8f9a50..a2c7578 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h @@ -9,7 +9,7 @@
#include <config.h>
-#ifdef CONFIG_ARCH_LS2080A +#ifdef CONFIG_FSL_LSCH3 enum srds_prtcl { /* * Nobody will check whether the device 'NONE' has been configured, @@ -158,6 +158,7 @@ void fsl_serdes_init(void); int serdes_get_first_lane(u32 sd, enum srds_prtcl device); enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); int is_serdes_prtcl_valid(int serdes, u32 prtcl); +int serdes_get_number(int serdes, int cfg);
#ifdef CONFIG_FSL_LSCH2 const char *serdes_clock_to_string(u32 clock); diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 59410aa..99a7413 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -246,6 +246,17 @@ struct ccsr_gur { #define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT #define FSL_CHASSIS3_SRDS1_REGSR 29 #define FSL_CHASSIS3_SRDS2_REGSR 29 +#elif defined(CONFIG_ARCH_LS1088A) +#define FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK 0xFFFF0000 +#define FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT 16 +#define FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK 0x0000FFFF +#define FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_SHIFT 0 +#define FSL_CHASSIS3_SRDS1_PRTCL_MASK FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK +#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT +#define FSL_CHASSIS3_SRDS2_PRTCL_MASK FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK +#define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_SHIFT +#define FSL_CHASSIS3_SRDS1_REGSR 29 +#define FSL_CHASSIS3_SRDS2_REGSR 30 #endif #define RCW_SB_EN_REG_INDEX 9 #define RCW_SB_EN_MASK 0x00000400 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index aeb1273..ea8aced 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -57,6 +57,10 @@ struct cpu_type { #define SVR_LS1023A 0x879208 #define SVR_LS1046A 0x870700 #define SVR_LS1026A 0x870708 +#define SVR_LS1048A 0x870320 +#define SVR_LS1084A 0x870302 +#define SVR_LS1088A 0x870300 +#define SVR_LS1044A 0x870322 #define SVR_LS2045A 0x870120 #define SVR_LS2080A 0x870110 #define SVR_LS2085A 0x870100 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h index d7d527d..d1891c4 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h @@ -66,12 +66,26 @@ #define FSL_USB2_STREAM_ID 2 #define FSL_SDMMC_STREAM_ID 3 #define FSL_SATA1_STREAM_ID 4 + +#if defined(CONFIG_ARCH_LS2080A) #define FSL_SATA2_STREAM_ID 5 +#endif + +#if defined(CONFIG_ARCH_LS2080A) #define FSL_DMA_STREAM_ID 6 +#elif defined(CONFIG_ARCH_LS1088A) +#define FSL_DMA_STREAM_ID 5 +#endif
/* PCI - programmed in PEXn_LUT */ #define FSL_PEX_STREAM_ID_START 7 + +#if defined(CONFIG_ARCH_LS2080A) #define FSL_PEX_STREAM_ID_END 22 +#elif defined(CONFIG_ARCH_LS1088A) +#define FSL_PEX_STREAM_ID_END 18 +#endif +
/* DPAA2 - set in MC DPC and alloced by MC */ #define FSL_DPAA2_STREAM_ID_START 23 diff --git a/drivers/ddr/fsl/util.c b/drivers/ddr/fsl/util.c index 0a305b3..d6e6e78 100644 --- a/drivers/ddr/fsl/util.c +++ b/drivers/ddr/fsl/util.c @@ -390,7 +390,7 @@ void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl,
void remove_unused_controllers(fsl_ddr_info_t *info) { -#ifdef CONFIG_FSL_LSCH3 +#ifdef CONFIG_SYS_FSL_HAS_CCN504 int i; u64 nodeid; void *hnf_sam_ctrl = (void *)(CCI_HN_F_0_BASE + CCN_HN_F_SAM_CTL); diff --git a/drivers/net/ldpaa_eth/Makefile b/drivers/net/ldpaa_eth/Makefile index 08675ec..13ecd38 100644 --- a/drivers/net/ldpaa_eth/Makefile +++ b/drivers/net/ldpaa_eth/Makefile @@ -7,3 +7,4 @@ obj-y += ldpaa_wriop.o obj-y += ldpaa_eth.o obj-$(CONFIG_ARCH_LS2080A) += ls2080a.o +obj-$(CONFIG_ARCH_LS1088A) += ls1088a.o diff --git a/drivers/net/ldpaa_eth/ls1088a.c b/drivers/net/ldpaa_eth/ls1088a.c new file mode 100644 index 0000000..703945c --- /dev/null +++ b/drivers/net/ldpaa_eth/ls1088a.c @@ -0,0 +1,87 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <phy.h> +#include <fsl-mc/ldpaa_wriop.h> +#include <asm/io.h> +#include <asm/arch/fsl_serdes.h> + +u32 dpmac_to_devdisr[] = { + [WRIOP1_DPMAC1] = FSL_CHASSIS3_DEVDISR2_DPMAC1, + [WRIOP1_DPMAC2] = FSL_CHASSIS3_DEVDISR2_DPMAC2, + [WRIOP1_DPMAC3] = FSL_CHASSIS3_DEVDISR2_DPMAC3, + [WRIOP1_DPMAC4] = FSL_CHASSIS3_DEVDISR2_DPMAC4, + [WRIOP1_DPMAC5] = FSL_CHASSIS3_DEVDISR2_DPMAC5, + [WRIOP1_DPMAC6] = FSL_CHASSIS3_DEVDISR2_DPMAC6, + [WRIOP1_DPMAC7] = FSL_CHASSIS3_DEVDISR2_DPMAC7, + [WRIOP1_DPMAC8] = FSL_CHASSIS3_DEVDISR2_DPMAC8, + [WRIOP1_DPMAC9] = FSL_CHASSIS3_DEVDISR2_DPMAC9, + [WRIOP1_DPMAC10] = FSL_CHASSIS3_DEVDISR2_DPMAC10, +}; + +static int is_device_disabled(int dpmac_id) +{ + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + u32 devdisr2 = in_le32(&gur->devdisr2); + + return dpmac_to_devdisr[dpmac_id] & devdisr2; +} + +void wriop_dpmac_disable(int dpmac_id) +{ + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + + setbits_le32(&gur->devdisr2, dpmac_to_devdisr[dpmac_id]); +} + +void wriop_dpmac_enable(int dpmac_id) +{ + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + + clrbits_le32(&gur->devdisr2, dpmac_to_devdisr[dpmac_id]); +} + +phy_interface_t wriop_dpmac_enet_if(int dpmac_id, int lane_prtcl) +{ + enum srds_prtcl; + + if (is_device_disabled(dpmac_id + 1)) + return PHY_INTERFACE_MODE_NONE; + + switch (lane_prtcl) { + case SGMII1: + case SGMII2: + case SGMII3: + case SGMII7: + return PHY_INTERFACE_MODE_SGMII; + } + + if (lane_prtcl >= XFI1 && lane_prtcl <= XFI2) + return PHY_INTERFACE_MODE_XGMII; + + if (lane_prtcl >= QSGMII_A && lane_prtcl <= QSGMII_B) + return PHY_INTERFACE_MODE_QSGMII; + + return PHY_INTERFACE_MODE_NONE; +} + +void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl) +{ + switch (lane_prtcl) { + case QSGMII_A: + wriop_init_dpmac(sd, 3, (int)lane_prtcl); + wriop_init_dpmac(sd, 4, (int)lane_prtcl); + wriop_init_dpmac(sd, 5, (int)lane_prtcl); + wriop_init_dpmac(sd, 6, (int)lane_prtcl); + break; + case QSGMII_B: + wriop_init_dpmac(sd, 7, (int)lane_prtcl); + wriop_init_dpmac(sd, 8, (int)lane_prtcl); + wriop_init_dpmac(sd, 9, (int)lane_prtcl); + wriop_init_dpmac(sd, 10, (int)lane_prtcl); + break; + } +}