-----Original Message----- From: Fabio Estevam [mailto:festevam@gmail.com] Sent: 2019年2月26日 20:36 To: sbabic@denx.de Cc: dl-uboot-imx uboot-imx@nxp.com; Peng Fan peng.fan@nxp.com; Abel Vesa abel.vesa@nxp.com; u-boot@lists.denx.de; Fabio Estevam festevam@gmail.com Subject: [PATCH 2/2] mx6sabreauto: README: Adjust the binary name after DM conversion
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly.
Signed-off-by: Fabio Estevam festevam@gmail.com
Acked-by: Peng Fan peng.fan@nxp.com
board/freescale/mx6sabreauto/README | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/board/freescale/mx6sabreauto/README b/board/freescale/mx6sabreauto/README index e8c589b92a..4c0fda1a2d 100644 --- a/board/freescale/mx6sabreauto/README +++ b/board/freescale/mx6sabreauto/README @@ -9,15 +9,15 @@ $ make mx6sabreauto_defconfig
$ make
-This will generate the SPL and u-boot.img binaries. +This will generate the SPL and u-boot-dtb.img binaries.
- Flash the SPL binary into the SD card:
$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
-- Flash the u-boot.img binary into the SD card: +- Flash the u-boot-dtb.img binary into the SD card:
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync
Booting via Falcon mode
@@ -32,15 +32,15 @@ $ make mx6sabreauto_defconfig
$ make
-This will generate the SPL image called SPL and the u-boot.img. +This will generate the SPL image called SPL and the u-boot-dtb.img.
- Flash the SPL image into the SD card:
$ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync
-- Flash the u-boot.img image into the SD card: +- Flash the u-boot-dtb.img image into the SD card:
-$ sudo dd if=u-boot.img of=/dev/sdb bs=1K seek=69 && sync +$ sudo dd if=u-boot-dtb.img of=/dev/sdb bs=1K seek=69 && sync
Create a FAT16 boot partition to store uImage and the dtb file, then copy the files there:
-- 2.17.1