Re: [PATCH] arch: mach-k3: Fix incorrect mapping of higher DDR addresses as device memory

On 14:15-20240109, Sekhar Nori wrote:

Entry for physical address 0x500000000 in memory map table for MMU configuration is spilling over and inadvertently making DDR available at higher address (above 4GB address space) get mapped as device memory (nGnRnE).

Fix this by adjusting entry size. Tested on AM62A SK. Before this patch:

=> time crc32 0x881000000 0x20000000 crc32 for 881000000 ... 8a0ffffff ==> 7f34d7ca

time: 1 minutes, 14.716 seconds

After patch:

=> time crc32 0x881000000 0x20000000 crc32 for 881000000 ... 8a0ffffff ==> 7f34d7ca

time: 2.710 seconds

Acked-by: Andrew Davis afd@ti.com Signed-off-by: Sekhar Nori nsekhar@ti.com

---

Applies to u-boot/next

arch/arm/mach-k3/arm64-mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-k3/arm64-mmu.c b/arch/arm/mach-k3/arm64-mmu.c index b4308205b2..0e07b1b7ce 100644 --- a/arch/arm/mach-k3/arm64-mmu.c +++ b/arch/arm/mach-k3/arm64-mmu.c @@ -41,7 +41,7 @@ struct mm_region k3_mem_map[] = { }, { .virt = 0x500000000UL, .phys = 0x500000000UL,

• .size = 0x400000000UL,
  

• .size = 0x380000000UL,
  

  .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN

-- 2.40.0

Thanks.

Reviewed-by: Nishanth Menon nm@ti.com