Hi,
u-boot-users-bounces@lists.sourceforge.net wrote on :
My second problem has nothing to deal with u-boot but with Linux: We want to use the two network devices as one bonding device for high availability.So i configured and compiled the bonding module and the ifenslave command. Transfered it to the eval board and could successfully load (insmod) the module. The problem is that the bonding module do not receive a link down signal from the fec driver and so do not recognize a missing/broken cable or similar.
Does your fec driver support link status changes? Are there kernel messages generated, if you plug/unplug your ethernet cable? If not, the driver maybe does not support the link status change interrupt. Or the PHY interrupt line is not connected with the cpu on your hardware?
Regards,
Martin Krause
-- TQ-Systems GmbH Muehlstrasse 2, Gut Delling, D-82229 Seefeld Amtsgericht Muenchen, HRB 105 018, UST-IdNr. DE 811 607 913 Geschaeftsfuehrer: Dipl.-Ing. (FH) Detlef Schneider, Dipl.-Ing. (FH) Ruediger Stahl http://www.tq-group.com