This patch provides support to program a flash extended address register.
extended/bank address register contains an information to access the 4th byte addressing in 3-byte address mode.
Currently added an extended/bank address register writing support for spansion flashes.
Signed-off-by: Jagannadha Sutradharudu Teki jaganna@xilinx.com --- drivers/mtd/spi/spi_flash.c | 41 ++++++++++++++++++++++++++++++++++ drivers/mtd/spi/spi_flash_internal.h | 6 +++++ 2 files changed, 47 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 00aece9..232ccc0 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -269,6 +269,47 @@ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr) return 0; }
+int spi_flash_cmd_extaddr_write(struct spi_flash *flash, u8 ear) +{ + u8 cmd; + u8 idcode0; + int ret; + + ret = spi_flash_cmd(flash->spi, CMD_READ_ID, &idcode0, 1); + if (ret) { + debug("SF: fail to read read id\n"); + return ret; + } + + if (idcode0 == 0x01) + cmd = CMD_EXT_BRWR; + else { + printf("SF: unable to support extaddr reg write" + " for %s flash\n", flash->name); + return -1; + } + + ret = spi_flash_cmd_write_enable(flash); + if (ret < 0) { + debug("SF: enabling write failed\n"); + return ret; + } + + ret = spi_flash_cmd_write(flash->spi, &cmd, 1, &ear, 1); + if (ret) { + debug("SF: fail to write ext addr register\n"); + return ret; + } + + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret < 0) { + debug("SF: write config register timed out\n"); + return ret; + } + + return 0; +} + /* * The following table holds all device probe functions * diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h index 141cfa8..dbceb81 100644 --- a/drivers/mtd/spi/spi_flash_internal.h +++ b/drivers/mtd/spi/spi_flash_internal.h @@ -28,6 +28,9 @@ #define CMD_ERASE_64K 0xd8 #define CMD_ERASE_CHIP 0xc7
+/* Extended addr acess commands */ +#define CMD_EXT_BRWR 0x17 + /* Common status */ #define STATUS_WIP 0x01
@@ -77,6 +80,9 @@ static inline int spi_flash_cmd_write_disable(struct spi_flash *flash) /* Program the status register. */ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr);
+/* Program the extended address register */ +int spi_flash_cmd_extaddr_write(struct spi_flash *flash, u8 ear); + /* * Same as spi_flash_cmd_read() except it also claims/releases the SPI * bus. Used as common part of the ->read() operation.