On 23.05.2015 01:06, Peter Robinson wrote:
On 22 May 2015 19:48, "Soeren Moch" <smoch@web.de mailto:smoch@web.de> wrote:
Move all standard filesystem, partition and fdt options to mx6_common.
Signed-off-by: Peter Robinson <pbrobinson at gmail.com
http://gmail.com http://lists.denx.de/mailman/listinfo/u-boot>
[...]
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 07fc3e8..c323038 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -67,6 +67,17 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200
+/* Filesystems and image support */ +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT
/* Miscellaneous configurable options */ #define CONFIG_SYS_NO_FLASH #undef CONFIG_CMD_IMLS
Peter,
Thanks for fixing EFI_PARTITION in tbs2910.
You still define CONFIG_CMD_EXT2 and CONFIG_CMD_EXT4, while only CONFIG_CMD_EXT4 is required. That is not really a problem, but since you are doing cleanup here...
Yes, i looked at this and a good half were including ext2. I plan on doing another pass so I figure there's enough churn already in this series so get it merged and ensure there's no regression and then re-review.
Ah ok, if you want to run ext2ls / ext2load you need CONFIG_CMD_EXT2 explicitly. I thought that this would also be enabled by CONFIG_CMD_EXT4 automatically.
Sorry for the noise, Soeren