Add the specific board model from EEPROM config to the device-tree to make it easier to access from Linux userspace.
Signed-off-by: Tim Harvey tharvey@gateworks.com --- board/gateworks/venice/imx8mm_venice.c | 8 ++++++++ configs/imx8mm_venice_defconfig | 1 + 2 files changed, 9 insertions(+)
diff --git a/board/gateworks/venice/imx8mm_venice.c b/board/gateworks/venice/imx8mm_venice.c index ca01e75d0d..2a97d55d32 100644 --- a/board/gateworks/venice/imx8mm_venice.c +++ b/board/gateworks/venice/imx8mm_venice.c @@ -152,3 +152,11 @@ int board_mmc_get_env_dev(int devno) { return devno; } + +int ft_board_setup(void *blob, struct bd_info *bd) +{ + /* set board model dt prop */ + fdt_setprop_string(blob, 0, "board", gsc_get_model()); + + return 0; +} diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig index f1efdc60a4..58b00a6813 100644 --- a/configs/imx8mm_venice_defconfig +++ b/configs/imx8mm_venice_defconfig @@ -27,6 +27,7 @@ CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" +CONFIG_OF_BOARD_SETUP=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg" # CONFIG_USE_BOOTCOMMAND is not set