Add bootcmd for IFC NOR boot and SD boot.
Signed-off-by: Wasim Khan wasim.khan@nxp.com --- include/configs/ls2080aqds.h | 45 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 39 insertions(+), 6 deletions(-)
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 74c7dc4..85f12d4 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2017 NXP + * Copyright 2018-2019 NXP * Copyright 2015 Freescale Semiconductor */
@@ -378,8 +378,8 @@ unsigned long get_board_ddr_clk(void); "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "loadaddr=0x80100000\0" \ "loadaddr_sd=0x90100000\0" \ - "kernel_addr=0x100000\0" \ - "kernel_addr_sd=0x800\0" \ + "kernel_addr=0x581000000\0" \ + "kernel_addr_sd=0x8000\0" \ "ramdisk_addr=0x800000\0" \ "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ @@ -389,9 +389,23 @@ unsigned long get_board_ddr_clk(void); "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "kernel_size_sd=0x14000\0" \ - "mcinitcmd=fsl_mc start mc 0x580a00000" \ - " 0x580e00000 \0" \ - "mcmemsize=0x70000000 \0" + "load_addr=0xa0000000\0" \ + "kernelheader_addr=0x580800000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "kernelheader_size=0x40000\0" \ + "BOARD=ls2088aqds\0" \ + "mcmemsize=0x70000000 \0" \ + IFC_MC_INIT_CMD \ + "nor_bootcmd=echo Trying load from nor..;" \ + "cp.b $kernel_addr $load_addr " \ + "$kernel_size ; env exists secureboot && " \ + "cp.b $kernelheader_addr $kernelheader_addr_r " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ + "bootm $load_addr#$BOARD\0" \ + "sd_bootcmd=echo Trying load from SD ..;" \ + "mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "bootm $load_addr#$BOARD\0" #elif defined(CONFIG_SD_BOOT) #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ @@ -426,6 +440,25 @@ unsigned long get_board_ddr_clk(void); #endif /* CONFIG_TFABOOT */ #endif /* CONFIG_SECURE_BOOT */
+#ifdef CONFIG_TFABOOT +#define SD_BOOTCOMMAND \ + "env exists mcinitcmd && env exists secureboot "\ + "&& mmcinfo && mmc read $load_addr 0x3c00 0x800 " \ + "&& esbc_validate $load_addr; " \ + "env exists mcinitcmd && run mcinitcmd " \ + "&& mmc read 0x88000000 0x6800 0x800 " \ + "&& fsl_mc lazyapply dpl 0x88000000; " \ + "run sd_bootcmd; " \ + "env exists secureboot && esbc_halt;" + +#define IFC_NOR_BOOTCOMMAND \ + "env exists mcinitcmd && env exists secureboot "\ + "&& esbc_validate 0x580780000; env exists mcinitcmd "\ + "&& fsl_mc lazyapply dpl 0x580d00000;" \ + "run nor_bootcmd; " \ + "env exists secureboot && esbc_halt;" +#endif + #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) #define CONFIG_FSL_MEMAC #define CONFIG_PHYLIB_10G