28 Dec
2019
28 Dec
'19
11:48 a.m.
Commit ec837c82d709 ("imx6: wandboard: convert to DM_PMIC") caused the following pmic_get() error:
CPU: Freescale i.MX6QP rev1.0 at 792 MHz Reset cause: POR DRAM: 2 GiB PMIC: pmic_get() ret -19 ... and since the PMIC presence is used to determine the board D1 revision, the following error is seen when booting a board rev D1:
WARNING: Could not determine dtb to use and the kernel does not boot at all. Fix the regression by passing "pfuze100@8" as the correct parameter to the pmic_get() function in the DM case. Fixes: ec837c82d709 ("imx6: wandboard: convert to DM_PMIC") Signed-off-by: Fabio Estevam festevam@gmail.com
Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================