Add a new Kconfig option to allow timer drivers to be used in SPL.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v2: None
common/spl/Kconfig | 9 +++++++++ drivers/Makefile | 1 + 2 files changed, 10 insertions(+)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index f4dcc4e..8b3bce9 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -494,6 +494,15 @@ config SPL_SPI_SUPPORT enable SPI drivers that are needed for other purposes also, such as a SPI PMIC.
+config SPL_TIMER_SUPPORT + bool "Support timer drivers" + depends on SPL + help + Enable support for timer drivers in SPL. These can be used to get + a timer value when in SPL, or perhaps for implementing a delay + function. This enables the drivers in drivers/timer as part of an + SPL build. + config SPL_USBETH_SUPPORT bool "Support USB Ethernet drivers" depends on SPL diff --git a/drivers/Makefile b/drivers/Makefile index e5b443e..4faa284 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/ obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/ +obj-$(CONFIG_SPL_TIMER_SUPPORT) += timer/ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/ obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/