MXC_OTG_PHYCTRL_OC_DIS_BIT disables the oc pin if set, like MXC_H1_OC_DIS_BIT, not the opposite.
Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com Cc: Marek Vasut marex@denx.de Cc: Stefano Babic sbabic@denx.de --- Changes for v2: None.
.../drivers/usb/host/ehci-mx5.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git u-boot-usb-76454b2.orig/drivers/usb/host/ehci-mx5.c u-boot-usb-76454b2/drivers/usb/host/ehci-mx5.c index 66ab25d..1248671 100644 --- u-boot-usb-76454b2.orig/drivers/usb/host/ehci-mx5.c +++ u-boot-usb-76454b2/drivers/usb/host/ehci-mx5.c @@ -144,11 +144,11 @@ int mxc_set_usbcontrol(int port, unsigned int flags) v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); if (flags & MXC_EHCI_POWER_PINS_ENABLED) - /* OC/USBPWR is not used */ - v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; - else /* OC/USBPWR is used */ v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; + else + /* OC/USBPWR is not used */ + v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);