On 12:44 Wed 09 Jul , Mark Jonas wrote:
Hi,
Some Linux drivers like the smc911x driver, as used on TQMA31, rely on the MAC address in the appropriate register, but U-Boot resets the controller after every transfer. A patch for the Linux driver is necessary to extract the MAC address from the kernel boot parameter line and set the MAC address register accordingly. This patch adds the kernel parameter "ethaddr" to the U-Boot default environment so that the user cannot forget it.
Do you know the nwhwconf patch? We used it with a kernel 2.6.22 for Renesas SH3. It adds a kernel parameter nwhwconf and one of its options is to specify a hwaddr which is the MAC address to use. The Ethernet driver does not have to do anything other than to support the ethtool interface.
Example: nwhwconf=device:eth0,hwaddr:12:34:56:78:90:ab
I allready point it.
Personnaly, until we can merge the arm in order to use FDT, I prefer the nwhwconf patch done by Stuart from ST
Best Regards, J.