Hello list,
inside the automatic U-Boot patch tracking system a new ticket [DNX#2006033142000267] was created:
<snip>
On Mon, Aug 08, 2005 at 01:08:47AM +0200, Wolfgang Denk wrote:
Among the modified and not tested targets there is a group of targets which were implementing their custom multi-partition scheme. This was mostly duplicating jffs2_part_info() routine code. Introducing the new common scheme required removing this duplicated code, so those targets should be especially carefully tested by the board main- tainers. Target list that require special attention: xsengine, voiceblue, ...
Hi Wolfgang,
support for VoiceBlue board is broken in 1.1.3, because it needs partitions (well, my fault. I shouldn't be on holidays ;-)). Patch below fixes that (and a bit more).
Best regards, ladis
CHANGELOG
- VoiceBlue update: use new MTD flash partitioning methods, use more reasonable TEXT_BASE, update default environment and enable keyed autoboot.
Signed-off-by: Ladislav Michl ladis@linux-mips.org
diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk --- a/board/voiceblue/config.mk +++ b/board/voiceblue/config.mk @@ -12,5 +12,5 @@ ifeq ($(VOICEBLUE_SMALL_FLASH),y) TEXT_BASE = 0x20012000 else # Running in SDRAM... -TEXT_BASE = 0x13000000 +TEXT_BASE = 0x13FD0000 endif diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -47,6 +47,8 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
/*
- Physical Memory Map
*/ @@ -94,7 +96,6 @@
#define CONFIG_ENV_OVERWRITE
-#define CFG_JFFS_CUSTOM_PART /* see board/voiceblue/jffs2parts.c */ #endif
/* @@ -104,9 +105,11 @@ #ifdef VOICEBLUE_SMALL_FLASH #define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE) #define CONFIG_STACKSIZE SZ_8K +#define PHYS_SDRAM_1_RESERVED 0 #else #define CFG_MALLOC_LEN SZ_4M #define CONFIG_STACKSIZE SZ_1M +#define PHYS_SDRAM_1_RESERVED (CFG_MONITOR_LEN + CFG_MALLOC_LEN + CONFIG_STACKSIZE) #endif
/* @@ -174,6 +177,7 @@ #define CONFIG_BOOTCOMMAND "run nboot" #define CONFIG_PREBOOT "run setup" #define CONFIG_EXTRA_ENV_SETTINGS \
- "silent=1\0" \ "ospart=0\0" \ "swapos=no\0" \ "setpart=" \
@@ -185,15 +189,37 @@ "fi\0" \ "setup=setenv bootargs console=ttyS0,$baudrate " \ "mtdparts=$mtdparts\0" \
- "nfsargs=run setpart; setenv bootargs $bootargs " \
"root=/dev/nfs ip=dhcp\0" \
- "nfsargs=setenv bootargs $bootargs " \
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \"nfsroot=$rootpath root=/dev/nfs\0" \
- "nboot=run nfsargs; bootp; tftp; bootm\0" \
- "fboot=run flashargs; fsload /boot/uImage; bootm\0"
- "initrdargs=setenv bootargs $bootargs " \
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \- "fboot=run flashargs; fsload /boot/uImage; bootm\0" \
- "iboot=bootp; run initrdargs; tftp; bootm\0" \
- "nboot=bootp; run nfsargs; tftp; bootm\0"
#endif
+#ifndef VOICEBLUE_SMALL_FLASH +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
</snip>
Your U-Boot support team